Migrating repo.

firmware/Makefile

@@ -0,0 +1,108 @@
+# GNU/Linux specific Make directives.
+
+# Declare tools.
+SHELL = /bin/sh
+CC = avr-gcc
+LD = avr-gcc
+OBJCOPY = avr-objcopy
+ECHO = @echo -e
+
+
+# CHANGE HERE FOR YOUR PROJECT
+MCU = attiny13a
+MCUPROG = ATtiny13
+ARCH = 
+SOURCES = main.c
+
+
+# Programmer sepcs
+SOFTPROGRAM = avrdude
+HARDPROGRAM = buspirate
+PORT = /dev/ttyUSB0
+
+
+CFLAGS	= -mmcu=$(MCU) -Os -std=c99
+LDFLAGS	= -mmcu=$(MCU)
+OBJFLAGS = -j .text -j .data -O ihex
+
+EXECUTABLE = firmware
+
+
+OBJECTS = $(SOURCES:.c=.o)
+CLEANFILES = main.o main.asm main.map main.lst main.cod $(EXECUTABLE).elf
+
+
+
+# To get a fully verbose make output do declare 'AT' at the command line like so: 'make AT='.
+# By default AT is undefined and thus assigned the string '@' which suppresses output from commands.
+AT ?= @
+
+# Colors and efects
+#######################################
+
+NORMAL			= \033[m
+
+FG_BLACK		= \033[30m
+FG_DKRED		= \033[31m
+FG_DKGREEN		= \033[32;7m
+FG_DKYELLOW		= \033[33m
+FG_DKBLUE		= \033[34m
+FG_DKMAGENTA	= \033[35m
+FG_DKCYAN		= \033[36m
+FG_GRAY			= \033[37m
+FG_DKGRAY		= \033[30;1m
+FG_REDFULL		= \033[31;7m
+FG_GREEN		= \033[32;1m
+FG_YELLOW		= \033[33;7m
+FG_BLUE			= \033[34;7m
+FG_MAGENTA		= \033[35;1m
+FG_CYAN			= \033[36;1m
+FG_WHITE		= \033[37;1m
+
+
+BG_BLACK		= \033[40m
+BG_DKRED		= \033[41m
+BG_DKGREEN		= \033[42m
+BG_DKYELLOW		= \033[43m
+BG_DKBLUE		= \033[44m
+BG_DKMAGENTA	= \033[45m
+BG_DKCYAN		= \033[46m
+BG_GRAY			= \033[47m
+BG_DKGRAY		= \033[40;1m
+BG_RED			= \033[41;1m
+BG_GREEN		= \033[42;1m
+BG_YELLOW		= \033[43;1m
+BG_BLUE			= \033[44;1m
+BG_MAGENTA		= \033[45;1m
+BG_CYAN			= \033[46;1m
+BG_WHITE		= \033[47;1m
+
+##########################################
+
+.SUFFIXES: .c .o
+.PHONY: clean
+
+# Compile
+all: $(EXECUTABLE)
+
+.c.o:
+	$(ECHO) "[$(FG_BLUE)COMPILING$(NORMAL)] $@"
+	$(AT) $(CC) $(CFLAGS) -o $*.o -c $<
+
+$(EXECUTABLE): $(OBJECTS)
+
+	$(ECHO) "[$(FG_YELLOW)LINKING$(NORMAL)] $(EXECUTABLE).elf"
+	$(AT) $(LD) $(LDFLAGS) $(OBJECTS) -o $(EXECUTABLE).elf
+	$(ECHO) "[$(FG_YELLOW)BUILDING$(NORMAL)] $(EXECUTABLE).hex"
+	$(AT) $(OBJCOPY) $(OBJFLAGS) $(EXECUTABLE).elf $(EXECUTABLE).hex
+	$(ECHO) "[$(FG_DKGREEN)SUCCESS$(NORMAL)]"
+
+clean:
+	$(ECHO) "[$(FG_REDFULL)CLEANED$(NORMAL)] $(CLEANFILES)" 
+	$(AT) rm -rf $(CLEANFILES)
+	
+flash:
+	$(AT) $(SOFTPROGRAM) -p $(MCUPROG) -c $(HARDPROGRAM) -P $(PORT) -e -U flash:w:$(EXECUTABLE).hex
+	$(ECHO) "[$(FG_WHITE)PROGRAMMED$(NORMAL)]" 
+
+