Added folder firmware/v01 and started working on version 0.1 of the firmware.

firmware/v01/v01.ino

@@ -0,0 +1,69 @@
+/*********************************************************************
+
+
+
+
+
+
+*********************************************************************/
+
+#include <SPI.h>
+#include <Wire.h>
+#include <SoftwareSerial.h>
+#include "Adafruit_GFX.h"
+#include "Adafruit_SSD1306.h"
+
+#define OLED_RESET 8
+Adafruit_SSD1306 display(OLED_RESET);
+
+// Create SoftwareSerial object and designate pins
+  SoftwareSerial mySerial(6, 7); // RX, TX
+
+#if (SSD1306_LCDHEIGHT != 32)
+#error("Height incorrect, please fix Adafruit_SSD1306.h!");
+#endif
+
+void setup()   {                
+  //Serial.begin(9600);
+
+  
+  // set the data rate for the SoftwareSerial port
+  mySerial.begin(9600);
+
+  // by default, we'll generate the high voltage from the 3.3v line internally! (neat!)
+  display.begin(SSD1306_SWITCHCAPVCC, 0x3C);  // initialize with the I2C addr 0x3C (for the 128x32)
+  // init done
+  
+  // Show image buffer on the display hardware.
+  // Since the buffer is intialized with an Adafruit splashscreen
+  // internally, this will display the splashscreen.
+  display.display();
+  delay(2000);
+
+  // Clear the buffer.
+  display.clearDisplay();
+
+  // Draw the battery icon
+  display.drawRect(111, 1, 16, 6, WHITE);
+  display.drawPixel(110, 3, WHITE);
+  display.drawPixel(110, 4, WHITE);
+  display.drawPixel(109, 3, WHITE);
+  display.drawPixel(109, 4, WHITE);
+  display.drawPixel(108, 3, WHITE);
+  display.drawPixel(108, 4, WHITE);
+  
+  // Show the display buffer on the hardware.
+  // NOTE: You _must_ call display after making any drawing commands
+  // to make them visible on the display hardware!
+  display.display();
+  delay(2000);
+  //display.clearDisplay();
+}
+
+void loop() {
+
+  mySerial.println("TX working, yeaiii :)");
+  delay(5000);
+
+}
+