Screen changed to landscape, #define to configure screen to landscape or portrait.
This commit is contained in:
Ricardo LAP
@@ -1,4 +0,0 @@
|
||||
Command: cmake -G Ninja -B /home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/V0.1/build -DPYTHON_DEPS_CHECKED=1 -DPYTHON=/home/ricardo/.espressif/tools/python/v6.1/venv/bin/python -DESP_PLATFORM=1 -DCCACHE_ENABLE=False /home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/V0.1
|
||||
NOTE: Kconfig parser version: 1
|
||||
NOTE: Kconfig defaults policy: use sdkconfig
|
||||
NOTE: Status: Finished successfully
|
||||
@@ -1,6 +0,0 @@
|
||||
Command: /home/ricardo/.espressif/tools/python/v6.1/venv/bin/python /home/ricardo/.espressif/v6.1/esp-idf/tools/idf_monitor.py -p /dev/ttyUSB0 -b 115200 --toolchain-prefix xtensa-esp32-elf- --target esp32 --revision 0 /home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/V0.1/build/ReflowPlate.elf /home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/V0.1/build/bootloader/bootloader.elf -m '/home/ricardo/.espressif/tools/python/v6.1/venv/bin/python' '/home/ricardo/.espressif/v6.1/esp-idf/tools/idf.py'
|
||||
--- esp-idf-monitor 1.10.0 on /dev/ttyUSB0 115200
|
||||
--- Quit: Ctrl+] | Menu: Ctrl+T | Help: Ctrl+T followed by Ctrl+H
|
||||
--- 0x40080400: _invalid_pc_placeholder at /home/ricardo/.espressif/v6.1/esp-idf/components/xtensa/xtensa_vectors.S:2259
|
||||
--- 0x40080644: call_start_cpu0 at /home/ricardo/.espressif/v6.1/esp-idf/components/bootloader/subproject/main/bootloader_start.c:27
|
||||
|
||||
4
build/log/idf_py_stderr_output_50732
Normal file
4
build/log/idf_py_stderr_output_50732
Normal file
@@ -0,0 +1,4 @@
|
||||
Command: cmake -G Ninja -B /home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/Reflow-plate/build -DPYTHON_DEPS_CHECKED=1 -DPYTHON=/home/ricardo/.espressif/tools/python/v6.1/venv/bin/python -DESP_PLATFORM=1 -DCCACHE_ENABLE=False /home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/Reflow-plate
|
||||
NOTE: Kconfig parser version: 1
|
||||
NOTE: Kconfig defaults policy: use sdkconfig
|
||||
NOTE: Status: Finished successfully
|
||||
1
build/log/idf_py_stderr_output_58038
Normal file
1
build/log/idf_py_stderr_output_58038
Normal file
@@ -0,0 +1 @@
|
||||
Command: ninja all
|
||||
1
build/log/idf_py_stderr_output_58048
Normal file
1
build/log/idf_py_stderr_output_58048
Normal file
@@ -0,0 +1 @@
|
||||
Command: ninja flash
|
||||
1
build/log/idf_py_stderr_output_58148
Normal file
1
build/log/idf_py_stderr_output_58148
Normal file
@@ -0,0 +1 @@
|
||||
Command: ninja all
|
||||
1
build/log/idf_py_stderr_output_58319
Normal file
1
build/log/idf_py_stderr_output_58319
Normal file
@@ -0,0 +1 @@
|
||||
Command: ninja all
|
||||
1
build/log/idf_py_stderr_output_58472
Normal file
1
build/log/idf_py_stderr_output_58472
Normal file
@@ -0,0 +1 @@
|
||||
Command: ninja all
|
||||
1
build/log/idf_py_stderr_output_58482
Normal file
1
build/log/idf_py_stderr_output_58482
Normal file
@@ -0,0 +1 @@
|
||||
Command: ninja flash
|
||||
1
build/log/idf_py_stderr_output_58530
Normal file
1
build/log/idf_py_stderr_output_58530
Normal file
@@ -0,0 +1 @@
|
||||
Command: ninja all
|
||||
1
build/log/idf_py_stderr_output_58682
Normal file
1
build/log/idf_py_stderr_output_58682
Normal file
@@ -0,0 +1 @@
|
||||
Command: ninja all
|
||||
1
build/log/idf_py_stderr_output_58692
Normal file
1
build/log/idf_py_stderr_output_58692
Normal file
@@ -0,0 +1 @@
|
||||
Command: ninja flash
|
||||
1
build/log/idf_py_stderr_output_58807
Normal file
1
build/log/idf_py_stderr_output_58807
Normal file
@@ -0,0 +1 @@
|
||||
Command: ninja all
|
||||
1
build/log/idf_py_stderr_output_58862
Normal file
1
build/log/idf_py_stderr_output_58862
Normal file
@@ -0,0 +1 @@
|
||||
Command: ninja all
|
||||
1
build/log/idf_py_stderr_output_58947
Normal file
1
build/log/idf_py_stderr_output_58947
Normal file
@@ -0,0 +1 @@
|
||||
Command: ninja all
|
||||
1
build/log/idf_py_stderr_output_59106
Normal file
1
build/log/idf_py_stderr_output_59106
Normal file
@@ -0,0 +1 @@
|
||||
Command: ninja all
|
||||
1
build/log/idf_py_stderr_output_59117
Normal file
1
build/log/idf_py_stderr_output_59117
Normal file
@@ -0,0 +1 @@
|
||||
Command: ninja flash
|
||||
1
build/log/idf_py_stderr_output_59496
Normal file
1
build/log/idf_py_stderr_output_59496
Normal file
@@ -0,0 +1 @@
|
||||
Command: ninja all
|
||||
1
build/log/idf_py_stderr_output_59648
Normal file
1
build/log/idf_py_stderr_output_59648
Normal file
@@ -0,0 +1 @@
|
||||
Command: ninja all
|
||||
1
build/log/idf_py_stderr_output_59658
Normal file
1
build/log/idf_py_stderr_output_59658
Normal file
@@ -0,0 +1 @@
|
||||
Command: ninja flash
|
||||
1
build/log/idf_py_stderr_output_59703
Normal file
1
build/log/idf_py_stderr_output_59703
Normal file
@@ -0,0 +1 @@
|
||||
Command: ninja all
|
||||
1
build/log/idf_py_stderr_output_59855
Normal file
1
build/log/idf_py_stderr_output_59855
Normal file
@@ -0,0 +1 @@
|
||||
Command: ninja all
|
||||
1
build/log/idf_py_stderr_output_59865
Normal file
1
build/log/idf_py_stderr_output_59865
Normal file
@@ -0,0 +1 @@
|
||||
Command: ninja flash
|
||||
1
build/log/idf_py_stderr_output_59916
Normal file
1
build/log/idf_py_stderr_output_59916
Normal file
@@ -0,0 +1 @@
|
||||
Command: ninja all
|
||||
1
build/log/idf_py_stderr_output_60101
Normal file
1
build/log/idf_py_stderr_output_60101
Normal file
@@ -0,0 +1 @@
|
||||
Command: ninja all
|
||||
1
build/log/idf_py_stderr_output_60111
Normal file
1
build/log/idf_py_stderr_output_60111
Normal file
@@ -0,0 +1 @@
|
||||
Command: ninja flash
|
||||
1
build/log/idf_py_stderr_output_60223
Normal file
1
build/log/idf_py_stderr_output_60223
Normal file
@@ -0,0 +1 @@
|
||||
Command: ninja all
|
||||
1
build/log/idf_py_stderr_output_60377
Normal file
1
build/log/idf_py_stderr_output_60377
Normal file
@@ -0,0 +1 @@
|
||||
Command: ninja all
|
||||
1
build/log/idf_py_stderr_output_60387
Normal file
1
build/log/idf_py_stderr_output_60387
Normal file
@@ -0,0 +1 @@
|
||||
Command: ninja flash
|
||||
1
build/log/idf_py_stderr_output_62019
Normal file
1
build/log/idf_py_stderr_output_62019
Normal file
@@ -0,0 +1 @@
|
||||
Command: ninja all
|
||||
1
build/log/idf_py_stderr_output_62214
Normal file
1
build/log/idf_py_stderr_output_62214
Normal file
@@ -0,0 +1 @@
|
||||
Command: ninja all
|
||||
1
build/log/idf_py_stderr_output_62224
Normal file
1
build/log/idf_py_stderr_output_62224
Normal file
@@ -0,0 +1 @@
|
||||
Command: ninja flash
|
||||
1
build/log/idf_py_stderr_output_62473
Normal file
1
build/log/idf_py_stderr_output_62473
Normal file
@@ -0,0 +1 @@
|
||||
Command: ninja all
|
||||
1
build/log/idf_py_stderr_output_62613
Normal file
1
build/log/idf_py_stderr_output_62613
Normal file
@@ -0,0 +1 @@
|
||||
Command: ninja flash
|
||||
1
build/log/idf_py_stderr_output_62968
Normal file
1
build/log/idf_py_stderr_output_62968
Normal file
@@ -0,0 +1 @@
|
||||
Command: ninja all
|
||||
1
build/log/idf_py_stderr_output_63106
Normal file
1
build/log/idf_py_stderr_output_63106
Normal file
@@ -0,0 +1 @@
|
||||
Command: ninja flash
|
||||
1
build/log/idf_py_stderr_output_63403
Normal file
1
build/log/idf_py_stderr_output_63403
Normal file
@@ -0,0 +1 @@
|
||||
Command: ninja all
|
||||
1
build/log/idf_py_stderr_output_63883
Normal file
1
build/log/idf_py_stderr_output_63883
Normal file
@@ -0,0 +1 @@
|
||||
Command: ninja all
|
||||
1
build/log/idf_py_stderr_output_64134
Normal file
1
build/log/idf_py_stderr_output_64134
Normal file
@@ -0,0 +1 @@
|
||||
Command: ninja all
|
||||
1
build/log/idf_py_stderr_output_64159
Normal file
1
build/log/idf_py_stderr_output_64159
Normal file
@@ -0,0 +1 @@
|
||||
Command: ninja all
|
||||
1
build/log/idf_py_stderr_output_64169
Normal file
1
build/log/idf_py_stderr_output_64169
Normal file
@@ -0,0 +1 @@
|
||||
Command: ninja flash
|
||||
@@ -1,70 +0,0 @@
|
||||
Command: cmake -G Ninja -B /home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/V0.1/build -DPYTHON_DEPS_CHECKED=1 -DPYTHON=/home/ricardo/.espressif/tools/python/v6.1/venv/bin/python -DESP_PLATFORM=1 -DCCACHE_ENABLE=False /home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/V0.1
|
||||
-- IDF_TARGET is not set, guessed 'esp32' from sdkconfig '/home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/V0.1/sdkconfig'
|
||||
-- Found Git: /usr/bin/git (found version "2.55.0")
|
||||
-- Minimal build - ON
|
||||
-- The C compiler identification is GNU 15.2.0
|
||||
-- The CXX compiler identification is GNU 15.2.0
|
||||
-- The ASM compiler identification is GNU
|
||||
-- Found assembler: /home/ricardo/.espressif/tools/xtensa-esp-elf/esp-15.2.0_20251204/xtensa-esp-elf/bin/xtensa-esp32-elf-gcc
|
||||
-- Detecting C compiler ABI info
|
||||
-- Detecting C compiler ABI info - done
|
||||
-- Check for working C compiler: /home/ricardo/.espressif/tools/xtensa-esp-elf/esp-15.2.0_20251204/xtensa-esp-elf/bin/xtensa-esp32-elf-gcc - skipped
|
||||
-- Detecting C compile features
|
||||
-- Detecting C compile features - done
|
||||
-- Detecting CXX compiler ABI info
|
||||
-- Detecting CXX compiler ABI info - done
|
||||
-- Check for working CXX compiler: /home/ricardo/.espressif/tools/xtensa-esp-elf/esp-15.2.0_20251204/xtensa-esp-elf/bin/xtensa-esp32-elf-g++ - skipped
|
||||
-- Detecting CXX compile features
|
||||
-- Detecting CXX compile features - done
|
||||
-- git rev-parse returned 'fatal: not a git repository (or any parent up to mount point /)
|
||||
Stopping at filesystem boundary (GIT_DISCOVERY_ACROSS_FILESYSTEM not set).'
|
||||
-- Could not use 'git describe' to determine PROJECT_VER.
|
||||
-- Building ESP-IDF components for target esp32
|
||||
NOTE: Dependencies lock doesn't exist, solving dependencies.
|
||||
............NOTE: Updating lock file at /home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/V0.1/dependencies.lock
|
||||
NOTE: Processing 7 dependencies:
|
||||
NOTE: [1/7] atanisoft/esp_lcd_touch_xpt2046 (1.0.6)
|
||||
NOTE: [2/7] espressif/cmake_utilities (0.5.3)
|
||||
NOTE: [3/7] espressif/esp_lcd_ili9341 (2.1.0)
|
||||
NOTE: [4/7] espressif/esp_lcd_touch (1.2.1)
|
||||
NOTE: [5/7] espressif/esp_lvgl_port (2.9.0)
|
||||
NOTE: [6/7] lvgl/lvgl (9.5.0)
|
||||
NOTE: [7/7] idf (6.1.0)
|
||||
-- KCONFIG_REPORT_VERBOSITY not set, using default
|
||||
-- Project sdkconfig file /home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/V0.1/sdkconfig
|
||||
-- Compiler supported targets: xtensa-esp-elf
|
||||
-- Detecting C compiler ABI info
|
||||
-- Detecting C compiler ABI info - done
|
||||
-- Detecting CXX compiler ABI info
|
||||
-- Detecting CXX compiler ABI info - done
|
||||
-- Detecting C compiler ABI info
|
||||
-- Detecting C compiler ABI info - done
|
||||
-- Detecting CXX compiler ABI info
|
||||
-- Detecting CXX compiler ABI info - done
|
||||
-- App "ReflowPlate" version: 1
|
||||
-- Found Python3: /home/ricardo/.espressif/tools/python/v6.1/venv/bin/python (found version "3.14.7") found components: Interpreter
|
||||
-- Performing Test CMAKE_HAVE_LIBC_PTHREAD
|
||||
-- Performing Test CMAKE_HAVE_LIBC_PTHREAD - Success
|
||||
-- Found Threads: TRUE
|
||||
-- Performing Test C_COMPILER_SUPPORTS_WFORMAT_SIGNEDNESS
|
||||
-- Performing Test C_COMPILER_SUPPORTS_WFORMAT_SIGNEDNESS - Success
|
||||
-- Setting up mbedtls configuration
|
||||
-- Linkage type is PUBLIC
|
||||
-- Adding linker script /home/ricardo/.espressif/v6.1/esp-idf/components/esp_system/ld/esp32/memory.ld.in
|
||||
-- -> Preprocessing .in script: /home/ricardo/.espressif/v6.1/esp-idf/components/esp_system/ld/esp32/memory.ld.in
|
||||
-- Adding linker script /home/ricardo/.espressif/v6.1/esp-idf/components/esp_system/ld/esp32/sections.ld.in
|
||||
-- -> Preprocessing .in script: /home/ricardo/.espressif/v6.1/esp-idf/components/esp_system/ld/esp32/sections.ld.in
|
||||
-- -> Applying ldgen processing: /home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/V0.1/build/esp-idf/esp_system/ld/sections.ld.in
|
||||
-- Adding linker script /home/ricardo/.espressif/v6.1/esp-idf/components/esp_rom/esp32/ld/esp32.rom.ld
|
||||
-- Adding linker script /home/ricardo/.espressif/v6.1/esp-idf/components/esp_rom/esp32/ld/esp32.rom.api.ld
|
||||
-- Adding linker script /home/ricardo/.espressif/v6.1/esp-idf/components/esp_rom/esp32/ld/esp32.rom.libgcc.ld
|
||||
-- Adding linker script /home/ricardo/.espressif/v6.1/esp-idf/components/esp_rom/esp32/ld/esp32.rom.libc-funcs.ld
|
||||
-- Adding linker script /home/ricardo/.espressif/v6.1/esp-idf/components/soc/esp32/ld/esp32.peripherals.ld
|
||||
-- Adding linker script /home/ricardo/.espressif/v6.1/esp-idf/components/esp_hal_regi2c/esp32/rom.regi2c.ld
|
||||
-- ESP_LCD_ILI9341: 2.1.0
|
||||
-- LVGL version: 9.5.0
|
||||
-- Components: app_update atanisoft__esp_lcd_touch_xpt2046 bootloader bootloader_support cxx driver efuse esp_app_format esp_blockdev esp_bootloader_format esp_common esp_driver_bitscrambler esp_driver_dma esp_driver_gpio esp_driver_i2c esp_driver_i2s esp_driver_parlio esp_driver_spi esp_hal_ana_conv esp_hal_clock esp_hal_dma esp_hal_gpio esp_hal_gpspi esp_hal_i2c esp_hal_i2s esp_hal_lcd esp_hal_mspi esp_hal_parlio esp_hal_pmu esp_hal_regi2c esp_hal_rtc_timer esp_hal_security esp_hal_systimer esp_hal_timg esp_hal_touch_sens esp_hal_twai esp_hal_uart esp_hal_usb esp_hal_wdt esp_hw_support esp_lcd esp_libc esp_mm esp_partition esp_pm esp_psram esp_ringbuf esp_rom esp_security esp_stdio esp_system esp_timer esp_usb_cdc_rom_console espressif__cmake_utilities espressif__esp_lcd_ili9341 espressif__esp_lcd_touch espressif__esp_lvgl_port esptool_py freertos hal heap log lvgl__lvgl main mbedtls partition_table pthread soc spi_flash xtensa
|
||||
-- Component paths: /home/ricardo/.espressif/v6.1/esp-idf/components/app_update /home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/V0.1/managed_components/atanisoft__esp_lcd_touch_xpt2046 /home/ricardo/.espressif/v6.1/esp-idf/components/bootloader /home/ricardo/.espressif/v6.1/esp-idf/components/bootloader_support /home/ricardo/.espressif/v6.1/esp-idf/components/cxx /home/ricardo/.espressif/v6.1/esp-idf/components/driver /home/ricardo/.espressif/v6.1/esp-idf/components/efuse /home/ricardo/.espressif/v6.1/esp-idf/components/esp_app_format /home/ricardo/.espressif/v6.1/esp-idf/components/esp_blockdev /home/ricardo/.espressif/v6.1/esp-idf/components/esp_bootloader_format /home/ricardo/.espressif/v6.1/esp-idf/components/esp_common /home/ricardo/.espressif/v6.1/esp-idf/components/esp_driver_bitscrambler /home/ricardo/.espressif/v6.1/esp-idf/components/esp_driver_dma /home/ricardo/.espressif/v6.1/esp-idf/components/esp_driver_gpio /home/ricardo/.espressif/v6.1/esp-idf/components/esp_driver_i2c /home/ricardo/.espressif/v6.1/esp-idf/components/esp_driver_i2s /home/ricardo/.espressif/v6.1/esp-idf/components/esp_driver_parlio /home/ricardo/.espressif/v6.1/esp-idf/components/esp_driver_spi /home/ricardo/.espressif/v6.1/esp-idf/components/esp_hal_ana_conv /home/ricardo/.espressif/v6.1/esp-idf/components/esp_hal_clock /home/ricardo/.espressif/v6.1/esp-idf/components/esp_hal_dma /home/ricardo/.espressif/v6.1/esp-idf/components/esp_hal_gpio /home/ricardo/.espressif/v6.1/esp-idf/components/esp_hal_gpspi /home/ricardo/.espressif/v6.1/esp-idf/components/esp_hal_i2c /home/ricardo/.espressif/v6.1/esp-idf/components/esp_hal_i2s /home/ricardo/.espressif/v6.1/esp-idf/components/esp_hal_lcd /home/ricardo/.espressif/v6.1/esp-idf/components/esp_hal_mspi /home/ricardo/.espressif/v6.1/esp-idf/components/esp_hal_parlio /home/ricardo/.espressif/v6.1/esp-idf/components/esp_hal_pmu /home/ricardo/.espressif/v6.1/esp-idf/components/esp_hal_regi2c /home/ricardo/.espressif/v6.1/esp-idf/components/esp_hal_rtc_timer /home/ricardo/.espressif/v6.1/esp-idf/components/esp_hal_security /home/ricardo/.espressif/v6.1/esp-idf/components/esp_hal_systimer /home/ricardo/.espressif/v6.1/esp-idf/components/esp_hal_timg /home/ricardo/.espressif/v6.1/esp-idf/components/esp_hal_touch_sens /home/ricardo/.espressif/v6.1/esp-idf/components/esp_hal_twai /home/ricardo/.espressif/v6.1/esp-idf/components/esp_hal_uart /home/ricardo/.espressif/v6.1/esp-idf/components/esp_hal_usb /home/ricardo/.espressif/v6.1/esp-idf/components/esp_hal_wdt /home/ricardo/.espressif/v6.1/esp-idf/components/esp_hw_support /home/ricardo/.espressif/v6.1/esp-idf/components/esp_lcd /home/ricardo/.espressif/v6.1/esp-idf/components/esp_libc /home/ricardo/.espressif/v6.1/esp-idf/components/esp_mm /home/ricardo/.espressif/v6.1/esp-idf/components/esp_partition /home/ricardo/.espressif/v6.1/esp-idf/components/esp_pm /home/ricardo/.espressif/v6.1/esp-idf/components/esp_psram /home/ricardo/.espressif/v6.1/esp-idf/components/esp_ringbuf /home/ricardo/.espressif/v6.1/esp-idf/components/esp_rom /home/ricardo/.espressif/v6.1/esp-idf/components/esp_security /home/ricardo/.espressif/v6.1/esp-idf/components/esp_stdio /home/ricardo/.espressif/v6.1/esp-idf/components/esp_system /home/ricardo/.espressif/v6.1/esp-idf/components/esp_timer /home/ricardo/.espressif/v6.1/esp-idf/components/esp_usb_cdc_rom_console /home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/V0.1/managed_components/espressif__cmake_utilities /home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/V0.1/managed_components/espressif__esp_lcd_ili9341 /home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/V0.1/managed_components/espressif__esp_lcd_touch /home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/V0.1/managed_components/espressif__esp_lvgl_port /home/ricardo/.espressif/v6.1/esp-idf/components/esptool_py /home/ricardo/.espressif/v6.1/esp-idf/components/freertos /home/ricardo/.espressif/v6.1/esp-idf/components/hal /home/ricardo/.espressif/v6.1/esp-idf/components/heap /home/ricardo/.espressif/v6.1/esp-idf/components/log /home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/V0.1/managed_components/lvgl__lvgl /home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/V0.1/main /home/ricardo/.espressif/v6.1/esp-idf/components/mbedtls /home/ricardo/.espressif/v6.1/esp-idf/components/partition_table /home/ricardo/.espressif/v6.1/esp-idf/components/pthread /home/ricardo/.espressif/v6.1/esp-idf/components/soc /home/ricardo/.espressif/v6.1/esp-idf/components/spi_flash /home/ricardo/.espressif/v6.1/esp-idf/components/xtensa
|
||||
-- Configuring done (22.4s)
|
||||
-- Generating done (0.8s)
|
||||
-- Build files have been written to: /home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/V0.1/build
|
||||
File diff suppressed because it is too large
Load Diff
@@ -1,8 +0,0 @@
|
||||
Command: ninja all
|
||||
[1/4] cd "/home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/V0.1/build" && /home/ricardo/.espressif/tools/python/v6.1/venv/bin/python /home/ricardo/.espressif/v6.1/esp-idf/components/partition_table/check_sizes.py --offset 0x8000 partition --type app /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/V0.1/build/partition_table/partition-table.bin /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/V0.1/build/ReflowPlate.bin
|
||||
ReflowPlate.bin binary size 0x75bb0 bytes. Smallest app partition is 0x100000 bytes. 0x8a450 bytes (54%) free.
|
||||
[2/4] Performing build step for 'bootloader'
|
||||
[1/1] cd "/home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/V0.1/build/bootloader" && /home/ricardo/.espressif/tools/python/v6.1/venv/bin/python /home/ricardo/.espressif/v6.1/esp-idf/components/partition_table/check_sizes.py --offset 0x8000 bootloader 0x1000 /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/V0.1/build/bootloader/bootloader.bin
|
||||
Bootloader binary size 0x6640 bytes. 0x9c0 bytes (9%) free.
|
||||
[3/4] No install step for 'bootloader'
|
||||
[4/4] Completed 'bootloader'
|
||||
File diff suppressed because one or more lines are too long
@@ -1,19 +0,0 @@
|
||||
Command: ninja all
|
||||
[1/9] Performing build step for 'bootloader'
|
||||
[1/1] cd "/home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/V0.1/build/bootloader" && /home/ricardo/.espressif/tools/python/v6.1/venv/bin/python /home/ricardo/.espressif/v6.1/esp-idf/components/partition_table/check_sizes.py --offset 0x8000 bootloader 0x1000 /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/V0.1/build/bootloader/bootloader.bin
|
||||
Bootloader binary size 0x6640 bytes. 0x9c0 bytes (9%) free.
|
||||
[2/9] No install step for 'bootloader'
|
||||
[3/9] Completed 'bootloader'
|
||||
[4/9] Building C object esp-idf/main/CMakeFiles/__idf_main.dir/main.c.obj
|
||||
[5/9] Linking C static library esp-idf/main/libmain.a
|
||||
[6/9] Generating esp-idf/esp_system/ld/sections.ld
|
||||
Skipping linker script generation, section names unchanged
|
||||
[7/9] Linking CXX executable ReflowPlate.elf
|
||||
[8/9] Generating binary image from built executable
|
||||
esptool v5.4.0
|
||||
Creating ESP32 image...
|
||||
Merged 3 ELF sections.
|
||||
Successfully created ESP32 image.
|
||||
Generated /home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/V0.1/build/ReflowPlate.bin
|
||||
[9/9] cd "/home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/V0.1/build" && /home/ricardo/.espressif/tools/python/v6.1/venv/bin/python /home/ricardo/.espressif/v6.1/esp-idf/components/partition_table/check_sizes.py --offset 0x8000 partition --type app /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/V0.1/build/partition_table/partition-table.bin /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/V0.1/build/ReflowPlate.bin
|
||||
ReflowPlate.bin binary size 0x758f0 bytes. Smallest app partition is 0x100000 bytes. 0x8a710 bytes (54%) free.
|
||||
@@ -1,8 +0,0 @@
|
||||
Command: ninja all
|
||||
[1/4] cd "/home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/V0.1/build" && /home/ricardo/.espressif/tools/python/v6.1/venv/bin/python /home/ricardo/.espressif/v6.1/esp-idf/components/partition_table/check_sizes.py --offset 0x8000 partition --type app /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/V0.1/build/partition_table/partition-table.bin /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/V0.1/build/ReflowPlate.bin
|
||||
ReflowPlate.bin binary size 0x758f0 bytes. Smallest app partition is 0x100000 bytes. 0x8a710 bytes (54%) free.
|
||||
[2/4] Performing build step for 'bootloader'
|
||||
[1/1] cd "/home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/V0.1/build/bootloader" && /home/ricardo/.espressif/tools/python/v6.1/venv/bin/python /home/ricardo/.espressif/v6.1/esp-idf/components/partition_table/check_sizes.py --offset 0x8000 bootloader 0x1000 /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/V0.1/build/bootloader/bootloader.bin
|
||||
Bootloader binary size 0x6640 bytes. 0x9c0 bytes (9%) free.
|
||||
[3/4] No install step for 'bootloader'
|
||||
[4/4] Completed 'bootloader'
|
||||
@@ -1,28 +0,0 @@
|
||||
Command: ninja all
|
||||
[1/9] Performing build step for 'bootloader'
|
||||
[1/1] cd "/home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/V0.1/build/bootloader" && /home/ricardo/.espressif/tools/python/v6.1/venv/bin/python /home/ricardo/.espressif/v6.1/esp-idf/components/partition_table/check_sizes.py --offset 0x8000 bootloader 0x1000 /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/V0.1/build/bootloader/bootloader.bin
|
||||
Bootloader binary size 0x6640 bytes. 0x9c0 bytes (9%) free.
|
||||
[2/9] No install step for 'bootloader'
|
||||
[3/9] Completed 'bootloader'
|
||||
[4/9] Building C object esp-idf/main/CMakeFiles/__idf_main.dir/main.c.obj
|
||||
/home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/V0.1/main/main.c: In function 'touch_debug_task':
|
||||
/home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/V0.1/main/main.c:216:9: warning: 'esp_lcd_touch_get_coordinates' is deprecated: This API will be removed in version 2.0.0. Use esp_lcd_touch_get_data instead! [-Wdeprecated-declarations]
|
||||
216 | bool pressed = esp_lcd_touch_get_coordinates(s_touch, x, y, strength, &count, 1);
|
||||
| ^~~~
|
||||
In file included from /home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/V0.1/managed_components/atanisoft__esp_lcd_touch_xpt2046/include/esp_lcd_touch_xpt2046.h:10,
|
||||
from /home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/V0.1/main/main.c:25:
|
||||
/home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/V0.1/managed_components/espressif__esp_lcd_touch/include/esp_lcd_touch.h:317:6: note: declared here
|
||||
317 | bool esp_lcd_touch_get_coordinates(esp_lcd_touch_handle_t tp, uint16_t *x, uint16_t *y, uint16_t *strength, uint8_t *point_num, uint8_t max_point_num);
|
||||
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||||
[5/9] Linking C static library esp-idf/main/libmain.a
|
||||
[6/9] Generating esp-idf/esp_system/ld/sections.ld
|
||||
Skipping linker fragment parsing, fragment files unchanged
|
||||
[7/9] Linking CXX executable ReflowPlate.elf
|
||||
[8/9] Generating binary image from built executable
|
||||
esptool v5.4.0
|
||||
Creating ESP32 image...
|
||||
Merged 3 ELF sections.
|
||||
Successfully created ESP32 image.
|
||||
Generated /home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/V0.1/build/ReflowPlate.bin
|
||||
[9/9] cd "/home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/V0.1/build" && /home/ricardo/.espressif/tools/python/v6.1/venv/bin/python /home/ricardo/.espressif/v6.1/esp-idf/components/partition_table/check_sizes.py --offset 0x8000 partition --type app /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/V0.1/build/partition_table/partition-table.bin /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/V0.1/build/ReflowPlate.bin
|
||||
ReflowPlate.bin binary size 0x75b50 bytes. Smallest app partition is 0x100000 bytes. 0x8a4b0 bytes (54%) free.
|
||||
@@ -1,8 +0,0 @@
|
||||
Command: ninja all
|
||||
[1/4] cd "/home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/V0.1/build" && /home/ricardo/.espressif/tools/python/v6.1/venv/bin/python /home/ricardo/.espressif/v6.1/esp-idf/components/partition_table/check_sizes.py --offset 0x8000 partition --type app /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/V0.1/build/partition_table/partition-table.bin /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/V0.1/build/ReflowPlate.bin
|
||||
ReflowPlate.bin binary size 0x75b50 bytes. Smallest app partition is 0x100000 bytes. 0x8a4b0 bytes (54%) free.
|
||||
[2/4] Performing build step for 'bootloader'
|
||||
[1/1] cd "/home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/V0.1/build/bootloader" && /home/ricardo/.espressif/tools/python/v6.1/venv/bin/python /home/ricardo/.espressif/v6.1/esp-idf/components/partition_table/check_sizes.py --offset 0x8000 bootloader 0x1000 /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/V0.1/build/bootloader/bootloader.bin
|
||||
Bootloader binary size 0x6640 bytes. 0x9c0 bytes (9%) free.
|
||||
[3/4] No install step for 'bootloader'
|
||||
[4/4] Completed 'bootloader'
|
||||
@@ -1,61 +0,0 @@
|
||||
Command: /home/ricardo/.espressif/tools/python/v6.1/venv/bin/python /home/ricardo/.espressif/v6.1/esp-idf/tools/idf_monitor.py -p /dev/ttyUSB0 -b 115200 --toolchain-prefix xtensa-esp32-elf- --target esp32 --revision 0 /home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/V0.1/build/ReflowPlate.elf /home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/V0.1/build/bootloader/bootloader.elf -m '/home/ricardo/.espressif/tools/python/v6.1/venv/bin/python' '/home/ricardo/.espressif/v6.1/esp-idf/tools/idf.py'
|
||||
ets Jul 29 2019 12:21:46
|
||||
|
||||
rst:0x1 (POWERON_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
|
||||
configsip: 0, SPIWP:0xee
|
||||
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
|
||||
mode:DIO, clock div:2
|
||||
load:0x3fff0040,len:6272
|
||||
load:0x40078000,len:15824
|
||||
load:0x40080400,len:3988
|
||||
entry 0x40080644
|
||||
[0;32mI (27) boot: ESP-IDF v6.1 2nd stage bootloader[0m
|
||||
[0;32mI (27) boot: compile time Sep 13 2026 19:20:43[0m
|
||||
[0;32mI (28) boot: Multicore bootloader[0m
|
||||
[0;32mI (29) boot: chip revision: v3.1[0m
|
||||
[0;32mI (31) boot.esp32: SPI Speed : 40MHz[0m
|
||||
[0;32mI (35) boot.esp32: SPI Mode : DIO[0m
|
||||
[0;32mI (39) boot.esp32: SPI Flash Size : 2MB[0m
|
||||
[0;32mI (42) boot: Enabling RNG early entropy source...[0m
|
||||
[0;32mI (47) boot: Partition Table:[0m
|
||||
[0;32mI (49) boot: ## Label Usage Type ST Offset Length[0m
|
||||
[0;32mI (56) boot: 0 nvs WiFi data 01 02 00009000 00006000[0m
|
||||
[0;32mI (62) boot: 1 phy_init RF data 01 01 0000f000 00001000[0m
|
||||
[0;32mI (69) boot: 2 factory factory app 00 00 00010000 00100000[0m
|
||||
[0;32mI (75) boot: End of partition table[0m
|
||||
[0;32mI (79) esp_image: segment 0: paddr=00010020 vaddr=3f400020 size=103a8h ( 66472) map[0m
|
||||
[0;32mI (110) esp_image: segment 1: paddr=000203d0 vaddr=3ffb0000 size=02b4ch ( 11084) load[0m
|
||||
[0;32mI (114) esp_image: segment 2: paddr=00022f24 vaddr=40080000 size=0d0f4h ( 53492) load[0m
|
||||
[0;32mI (136) esp_image: segment 3: paddr=00030020 vaddr=400d0020 size=55280h (348800) map[0m
|
||||
[0;32mI (261) esp_image: segment 4: paddr=000852a8 vaddr=4008d0f4 size=00854h ( 2132) load[0m
|
||||
[0;32mI (262) esp_image: segment 5: paddr=00085b04 vaddr=50000000 size=00028h ( 40) load[0m
|
||||
[0;32mI (272) boot: Loaded app from partition at offset 0x10000[0m
|
||||
[0;32mI (272) boot: Disabling RNG early entropy source...[0m
|
||||
[0;32mI (287) cpu_start: Multicore app[0m
|
||||
[0;32mI (295) cpu_start: GPIO 3 and 1 are used as console UART I/O pins[0m
|
||||
[0;32mI (295) cpu_start: Pro cpu start user code[0m
|
||||
[0;32mI (295) cpu_start: cpu freq: 160000000 Hz[0m
|
||||
[0;32mI (297) app_init: Application information:[0m
|
||||
[0;32mI (301) app_init: Project name: ReflowPlate[0m
|
||||
[0;32mI (305) app_init: App version: 1[0m
|
||||
[0;32mI (309) app_init: Compile time: Sep 13 2026 19:20:08[0m
|
||||
[0;32mI (314) app_init: ELF file SHA256: fcccf1b7a...[0m
|
||||
[0;32mI (318) app_init: ESP-IDF: v6.1[0m
|
||||
[0;32mI (322) efuse_init: Min chip rev: v0.0[0m
|
||||
[0;32mI (326) efuse_init: Max chip rev: v3.99 [0m
|
||||
[0;32mI (330) efuse_init: Chip rev: v3.1[0m
|
||||
[0;32mI (334) heap_init: Initializing. RAM available for dynamic allocation:[0m
|
||||
[0;32mI (340) heap_init: At 3FFAE6E0 len 00001920 (6 KiB): DRAM[0m
|
||||
[0;32mI (345) heap_init: At 3FFC3900 len 0001C700 (113 KiB): DRAM[0m
|
||||
[0;32mI (350) heap_init: At 3FFE0440 len 00003AE0 (14 KiB): D/IRAM[0m
|
||||
[0;32mI (355) heap_init: At 3FFE4350 len 0001BCB0 (111 KiB): D/IRAM[0m
|
||||
[0;32mI (361) heap_init: At 4008D948 len 000126B8 (73 KiB): IRAM[0m
|
||||
[0;33mW (367) spi_flash: Detected boya flash chip but using generic driver. For optimal functionality, enable `SPI_FLASH_SUPPORT_BOYA_CHIP` in menuconfig[0m
|
||||
[0;32mI (379) spi_flash: detected chip: generic[0m
|
||||
[0;32mI (383) spi_flash: flash io: dio[0m
|
||||
[0;33mW (386) spi_flash: Detected size(4096k) larger than the size in the binary image header(2048k). Using the size in the binary image header.[0m
|
||||
[0;32mI (400) main_task: Started on CPU0[0m
|
||||
[0;32mI (400) main_task: Calling app_main()[0m
|
||||
[0;32mI (400) cyd: init LCD SPI bus[0m
|
||||
[0;32mI (520) cyd: init touch SPI bus[0m
|
||||
[0;32mI (520) LVGL: Starting LVGL task[0m
|
||||
@@ -1,8 +0,0 @@
|
||||
Command: ninja all
|
||||
[1/4] cd "/home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/V0.1/build" && /home/ricardo/.espressif/tools/python/v6.1/venv/bin/python /home/ricardo/.espressif/v6.1/esp-idf/components/partition_table/check_sizes.py --offset 0x8000 partition --type app /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/V0.1/build/partition_table/partition-table.bin /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/V0.1/build/ReflowPlate.bin
|
||||
ReflowPlate.bin binary size 0x75b60 bytes. Smallest app partition is 0x100000 bytes. 0x8a4a0 bytes (54%) free.
|
||||
[2/4] Performing build step for 'bootloader'
|
||||
[1/1] cd "/home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/V0.1/build/bootloader" && /home/ricardo/.espressif/tools/python/v6.1/venv/bin/python /home/ricardo/.espressif/v6.1/esp-idf/components/partition_table/check_sizes.py --offset 0x8000 bootloader 0x1000 /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/V0.1/build/bootloader/bootloader.bin
|
||||
Bootloader binary size 0x6640 bytes. 0x9c0 bytes (9%) free.
|
||||
[3/4] No install step for 'bootloader'
|
||||
[4/4] Completed 'bootloader'
|
||||
@@ -1,32 +0,0 @@
|
||||
Command: ninja all
|
||||
[1/9] Performing build step for 'bootloader'
|
||||
[1/1] cd "/home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/V0.1/build/bootloader" && /home/ricardo/.espressif/tools/python/v6.1/venv/bin/python /home/ricardo/.espressif/v6.1/esp-idf/components/partition_table/check_sizes.py --offset 0x8000 bootloader 0x1000 /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/V0.1/build/bootloader/bootloader.bin
|
||||
Bootloader binary size 0x6640 bytes. 0x9c0 bytes (9%) free.
|
||||
[2/9] No install step for 'bootloader'
|
||||
[3/9] Completed 'bootloader'
|
||||
[4/9] Building C object esp-idf/main/CMakeFiles/__idf_main.dir/main.c.obj
|
||||
/home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/V0.1/main/main.c: In function 'touch_debug_task':
|
||||
/home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/V0.1/main/main.c:216:9: warning: 'esp_lcd_touch_get_coordinates' is deprecated: This API will be removed in version 2.0.0. Use esp_lcd_touch_get_data instead! [-Wdeprecated-declarations]
|
||||
216 | bool pressed = esp_lcd_touch_get_coordinates(s_touch, x, y, strength, &count, 1);
|
||||
| ^~~~
|
||||
In file included from /home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/V0.1/managed_components/atanisoft__esp_lcd_touch_xpt2046/include/esp_lcd_touch_xpt2046.h:10,
|
||||
from /home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/V0.1/main/main.c:25:
|
||||
/home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/V0.1/managed_components/espressif__esp_lcd_touch/include/esp_lcd_touch.h:317:6: note: declared here
|
||||
317 | bool esp_lcd_touch_get_coordinates(esp_lcd_touch_handle_t tp, uint16_t *x, uint16_t *y, uint16_t *strength, uint8_t *point_num, uint8_t max_point_num);
|
||||
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||||
/home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/V0.1/main/main.c: At top level:
|
||||
/home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/V0.1/main/main.c:209:13: warning: 'touch_debug_task' defined but not used [-Wunused-function]
|
||||
209 | static void touch_debug_task(void *arg)
|
||||
| ^~~~~~~~~~~~~~~~
|
||||
[5/9] Linking C static library esp-idf/main/libmain.a
|
||||
[6/9] Generating esp-idf/esp_system/ld/sections.ld
|
||||
Skipping linker fragment parsing, fragment files unchanged
|
||||
[7/9] Linking CXX executable ReflowPlate.elf
|
||||
[8/9] Generating binary image from built executable
|
||||
esptool v5.4.0
|
||||
Creating ESP32 image...
|
||||
Merged 3 ELF sections.
|
||||
Successfully created ESP32 image.
|
||||
Generated /home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/V0.1/build/ReflowPlate.bin
|
||||
[9/9] cd "/home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/V0.1/build" && /home/ricardo/.espressif/tools/python/v6.1/venv/bin/python /home/ricardo/.espressif/v6.1/esp-idf/components/partition_table/check_sizes.py --offset 0x8000 partition --type app /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/V0.1/build/partition_table/partition-table.bin /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/V0.1/build/ReflowPlate.bin
|
||||
ReflowPlate.bin binary size 0x758f0 bytes. Smallest app partition is 0x100000 bytes. 0x8a710 bytes (54%) free.
|
||||
@@ -1,8 +0,0 @@
|
||||
Command: ninja all
|
||||
[1/4] cd "/home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/V0.1/build" && /home/ricardo/.espressif/tools/python/v6.1/venv/bin/python /home/ricardo/.espressif/v6.1/esp-idf/components/partition_table/check_sizes.py --offset 0x8000 partition --type app /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/V0.1/build/partition_table/partition-table.bin /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/V0.1/build/ReflowPlate.bin
|
||||
ReflowPlate.bin binary size 0x758f0 bytes. Smallest app partition is 0x100000 bytes. 0x8a710 bytes (54%) free.
|
||||
[2/4] Performing build step for 'bootloader'
|
||||
[1/1] cd "/home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/V0.1/build/bootloader" && /home/ricardo/.espressif/tools/python/v6.1/venv/bin/python /home/ricardo/.espressif/v6.1/esp-idf/components/partition_table/check_sizes.py --offset 0x8000 bootloader 0x1000 /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/V0.1/build/bootloader/bootloader.bin
|
||||
Bootloader binary size 0x6640 bytes. 0x9c0 bytes (9%) free.
|
||||
[3/4] No install step for 'bootloader'
|
||||
[4/4] Completed 'bootloader'
|
||||
@@ -1,19 +0,0 @@
|
||||
Command: ninja all
|
||||
[1/9] Performing build step for 'bootloader'
|
||||
[1/1] cd "/home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/V0.1/build/bootloader" && /home/ricardo/.espressif/tools/python/v6.1/venv/bin/python /home/ricardo/.espressif/v6.1/esp-idf/components/partition_table/check_sizes.py --offset 0x8000 bootloader 0x1000 /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/V0.1/build/bootloader/bootloader.bin
|
||||
Bootloader binary size 0x6640 bytes. 0x9c0 bytes (9%) free.
|
||||
[2/9] No install step for 'bootloader'
|
||||
[3/9] Completed 'bootloader'
|
||||
[4/9] Building C object esp-idf/main/CMakeFiles/__idf_main.dir/main.c.obj
|
||||
[5/9] Linking C static library esp-idf/main/libmain.a
|
||||
[6/9] Generating esp-idf/esp_system/ld/sections.ld
|
||||
Skipping linker script generation, section names unchanged
|
||||
[7/9] Linking CXX executable ReflowPlate.elf
|
||||
[8/9] Generating binary image from built executable
|
||||
esptool v5.4.0
|
||||
Creating ESP32 image...
|
||||
Merged 3 ELF sections.
|
||||
Successfully created ESP32 image.
|
||||
Generated /home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/V0.1/build/ReflowPlate.bin
|
||||
[9/9] cd "/home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/V0.1/build" && /home/ricardo/.espressif/tools/python/v6.1/venv/bin/python /home/ricardo/.espressif/v6.1/esp-idf/components/partition_table/check_sizes.py --offset 0x8000 partition --type app /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/V0.1/build/partition_table/partition-table.bin /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/V0.1/build/ReflowPlate.bin
|
||||
ReflowPlate.bin binary size 0x758f0 bytes. Smallest app partition is 0x100000 bytes. 0x8a710 bytes (54%) free.
|
||||
@@ -1,8 +0,0 @@
|
||||
Command: ninja all
|
||||
[1/4] cd "/home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/V0.1/build" && /home/ricardo/.espressif/tools/python/v6.1/venv/bin/python /home/ricardo/.espressif/v6.1/esp-idf/components/partition_table/check_sizes.py --offset 0x8000 partition --type app /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/V0.1/build/partition_table/partition-table.bin /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/V0.1/build/ReflowPlate.bin
|
||||
ReflowPlate.bin binary size 0x758f0 bytes. Smallest app partition is 0x100000 bytes. 0x8a710 bytes (54%) free.
|
||||
[2/4] Performing build step for 'bootloader'
|
||||
[1/1] cd "/home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/V0.1/build/bootloader" && /home/ricardo/.espressif/tools/python/v6.1/venv/bin/python /home/ricardo/.espressif/v6.1/esp-idf/components/partition_table/check_sizes.py --offset 0x8000 bootloader 0x1000 /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/V0.1/build/bootloader/bootloader.bin
|
||||
Bootloader binary size 0x6640 bytes. 0x9c0 bytes (9%) free.
|
||||
[3/4] No install step for 'bootloader'
|
||||
[4/4] Completed 'bootloader'
|
||||
64
build/log/idf_py_stdout_output_50732
Normal file
64
build/log/idf_py_stdout_output_50732
Normal file
@@ -0,0 +1,64 @@
|
||||
Command: cmake -G Ninja -B /home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/Reflow-plate/build -DPYTHON_DEPS_CHECKED=1 -DPYTHON=/home/ricardo/.espressif/tools/python/v6.1/venv/bin/python -DESP_PLATFORM=1 -DCCACHE_ENABLE=False /home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/Reflow-plate
|
||||
-- IDF_TARGET is not set, guessed 'esp32' from sdkconfig '/home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/Reflow-plate/sdkconfig'
|
||||
-- Found Git: /usr/bin/git (found version "2.55.0")
|
||||
-- Minimal build - ON
|
||||
-- The C compiler identification is GNU 15.2.0
|
||||
-- The CXX compiler identification is GNU 15.2.0
|
||||
-- The ASM compiler identification is GNU
|
||||
-- Found assembler: /home/ricardo/.espressif/tools/xtensa-esp-elf/esp-15.2.0_20251204/xtensa-esp-elf/bin/xtensa-esp32-elf-gcc
|
||||
-- Detecting C compiler ABI info
|
||||
-- Detecting C compiler ABI info - done
|
||||
-- Check for working C compiler: /home/ricardo/.espressif/tools/xtensa-esp-elf/esp-15.2.0_20251204/xtensa-esp-elf/bin/xtensa-esp32-elf-gcc - skipped
|
||||
-- Detecting C compile features
|
||||
-- Detecting C compile features - done
|
||||
-- Detecting CXX compiler ABI info
|
||||
-- Detecting CXX compiler ABI info - done
|
||||
-- Check for working CXX compiler: /home/ricardo/.espressif/tools/xtensa-esp-elf/esp-15.2.0_20251204/xtensa-esp-elf/bin/xtensa-esp32-elf-g++ - skipped
|
||||
-- Detecting CXX compile features
|
||||
-- Detecting CXX compile features - done
|
||||
-- Building ESP-IDF components for target esp32
|
||||
NOTE: Dependencies lock doesn't exist, solving dependencies.
|
||||
.........NOTE: Updating lock file at /home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/Reflow-plate/dependencies.lock
|
||||
NOTE: Processing 5 dependencies:
|
||||
NOTE: [1/5] atanisoft/esp_lcd_touch_xpt2046 (1.0.6)
|
||||
NOTE: [2/5] espressif/esp_lcd_touch (1.2.1)
|
||||
NOTE: [3/5] espressif/esp_lvgl_port (2.9.0)
|
||||
NOTE: [4/5] lvgl/lvgl (9.5.0)
|
||||
NOTE: [5/5] idf (6.1.0)
|
||||
-- KCONFIG_REPORT_VERBOSITY not set, using default
|
||||
-- Project sdkconfig file /home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/Reflow-plate/sdkconfig
|
||||
-- Compiler supported targets: xtensa-esp-elf
|
||||
-- Detecting C compiler ABI info
|
||||
-- Detecting C compiler ABI info - done
|
||||
-- Detecting CXX compiler ABI info
|
||||
-- Detecting CXX compiler ABI info - done
|
||||
-- Detecting C compiler ABI info
|
||||
-- Detecting C compiler ABI info - done
|
||||
-- Detecting CXX compiler ABI info
|
||||
-- Detecting CXX compiler ABI info - done
|
||||
-- App "ReflowPlate" version: c54c68c-dirty
|
||||
-- Found Python3: /home/ricardo/.espressif/tools/python/v6.1/venv/bin/python (found version "3.14.7") found components: Interpreter
|
||||
-- Performing Test CMAKE_HAVE_LIBC_PTHREAD
|
||||
-- Performing Test CMAKE_HAVE_LIBC_PTHREAD - Success
|
||||
-- Found Threads: TRUE
|
||||
-- Performing Test C_COMPILER_SUPPORTS_WFORMAT_SIGNEDNESS
|
||||
-- Performing Test C_COMPILER_SUPPORTS_WFORMAT_SIGNEDNESS - Success
|
||||
-- Setting up mbedtls configuration
|
||||
-- Linkage type is PUBLIC
|
||||
-- Adding linker script /home/ricardo/.espressif/v6.1/esp-idf/components/esp_system/ld/esp32/memory.ld.in
|
||||
-- -> Preprocessing .in script: /home/ricardo/.espressif/v6.1/esp-idf/components/esp_system/ld/esp32/memory.ld.in
|
||||
-- Adding linker script /home/ricardo/.espressif/v6.1/esp-idf/components/esp_system/ld/esp32/sections.ld.in
|
||||
-- -> Preprocessing .in script: /home/ricardo/.espressif/v6.1/esp-idf/components/esp_system/ld/esp32/sections.ld.in
|
||||
-- -> Applying ldgen processing: /home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/Reflow-plate/build/esp-idf/esp_system/ld/sections.ld.in
|
||||
-- Adding linker script /home/ricardo/.espressif/v6.1/esp-idf/components/esp_rom/esp32/ld/esp32.rom.ld
|
||||
-- Adding linker script /home/ricardo/.espressif/v6.1/esp-idf/components/esp_rom/esp32/ld/esp32.rom.api.ld
|
||||
-- Adding linker script /home/ricardo/.espressif/v6.1/esp-idf/components/esp_rom/esp32/ld/esp32.rom.libgcc.ld
|
||||
-- Adding linker script /home/ricardo/.espressif/v6.1/esp-idf/components/esp_rom/esp32/ld/esp32.rom.libc-funcs.ld
|
||||
-- Adding linker script /home/ricardo/.espressif/v6.1/esp-idf/components/soc/esp32/ld/esp32.peripherals.ld
|
||||
-- Adding linker script /home/ricardo/.espressif/v6.1/esp-idf/components/esp_hal_regi2c/esp32/rom.regi2c.ld
|
||||
-- LVGL version: 9.5.0
|
||||
-- Components: app_update atanisoft__esp_lcd_touch_xpt2046 bootloader bootloader_support cxx driver efuse esp_app_format esp_blockdev esp_bootloader_format esp_common esp_driver_bitscrambler esp_driver_dma esp_driver_gpio esp_driver_i2c esp_driver_i2s esp_driver_parlio esp_driver_spi esp_hal_ana_conv esp_hal_clock esp_hal_dma esp_hal_gpio esp_hal_gpspi esp_hal_i2c esp_hal_i2s esp_hal_lcd esp_hal_mspi esp_hal_parlio esp_hal_pmu esp_hal_regi2c esp_hal_rtc_timer esp_hal_security esp_hal_systimer esp_hal_timg esp_hal_touch_sens esp_hal_twai esp_hal_uart esp_hal_usb esp_hal_wdt esp_hw_support esp_lcd esp_libc esp_mm esp_partition esp_pm esp_psram esp_ringbuf esp_rom esp_security esp_stdio esp_system esp_timer esp_usb_cdc_rom_console espressif__esp_lcd_touch espressif__esp_lvgl_port esptool_py freertos hal heap log lvgl__lvgl main mbedtls partition_table pthread soc spi_flash xtensa
|
||||
-- Component paths: /home/ricardo/.espressif/v6.1/esp-idf/components/app_update /home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/Reflow-plate/managed_components/atanisoft__esp_lcd_touch_xpt2046 /home/ricardo/.espressif/v6.1/esp-idf/components/bootloader /home/ricardo/.espressif/v6.1/esp-idf/components/bootloader_support /home/ricardo/.espressif/v6.1/esp-idf/components/cxx /home/ricardo/.espressif/v6.1/esp-idf/components/driver /home/ricardo/.espressif/v6.1/esp-idf/components/efuse /home/ricardo/.espressif/v6.1/esp-idf/components/esp_app_format /home/ricardo/.espressif/v6.1/esp-idf/components/esp_blockdev /home/ricardo/.espressif/v6.1/esp-idf/components/esp_bootloader_format /home/ricardo/.espressif/v6.1/esp-idf/components/esp_common /home/ricardo/.espressif/v6.1/esp-idf/components/esp_driver_bitscrambler /home/ricardo/.espressif/v6.1/esp-idf/components/esp_driver_dma /home/ricardo/.espressif/v6.1/esp-idf/components/esp_driver_gpio /home/ricardo/.espressif/v6.1/esp-idf/components/esp_driver_i2c /home/ricardo/.espressif/v6.1/esp-idf/components/esp_driver_i2s /home/ricardo/.espressif/v6.1/esp-idf/components/esp_driver_parlio /home/ricardo/.espressif/v6.1/esp-idf/components/esp_driver_spi /home/ricardo/.espressif/v6.1/esp-idf/components/esp_hal_ana_conv /home/ricardo/.espressif/v6.1/esp-idf/components/esp_hal_clock /home/ricardo/.espressif/v6.1/esp-idf/components/esp_hal_dma /home/ricardo/.espressif/v6.1/esp-idf/components/esp_hal_gpio /home/ricardo/.espressif/v6.1/esp-idf/components/esp_hal_gpspi /home/ricardo/.espressif/v6.1/esp-idf/components/esp_hal_i2c /home/ricardo/.espressif/v6.1/esp-idf/components/esp_hal_i2s /home/ricardo/.espressif/v6.1/esp-idf/components/esp_hal_lcd /home/ricardo/.espressif/v6.1/esp-idf/components/esp_hal_mspi /home/ricardo/.espressif/v6.1/esp-idf/components/esp_hal_parlio /home/ricardo/.espressif/v6.1/esp-idf/components/esp_hal_pmu /home/ricardo/.espressif/v6.1/esp-idf/components/esp_hal_regi2c /home/ricardo/.espressif/v6.1/esp-idf/components/esp_hal_rtc_timer /home/ricardo/.espressif/v6.1/esp-idf/components/esp_hal_security /home/ricardo/.espressif/v6.1/esp-idf/components/esp_hal_systimer /home/ricardo/.espressif/v6.1/esp-idf/components/esp_hal_timg /home/ricardo/.espressif/v6.1/esp-idf/components/esp_hal_touch_sens /home/ricardo/.espressif/v6.1/esp-idf/components/esp_hal_twai /home/ricardo/.espressif/v6.1/esp-idf/components/esp_hal_uart /home/ricardo/.espressif/v6.1/esp-idf/components/esp_hal_usb /home/ricardo/.espressif/v6.1/esp-idf/components/esp_hal_wdt /home/ricardo/.espressif/v6.1/esp-idf/components/esp_hw_support /home/ricardo/.espressif/v6.1/esp-idf/components/esp_lcd /home/ricardo/.espressif/v6.1/esp-idf/components/esp_libc /home/ricardo/.espressif/v6.1/esp-idf/components/esp_mm /home/ricardo/.espressif/v6.1/esp-idf/components/esp_partition /home/ricardo/.espressif/v6.1/esp-idf/components/esp_pm /home/ricardo/.espressif/v6.1/esp-idf/components/esp_psram /home/ricardo/.espressif/v6.1/esp-idf/components/esp_ringbuf /home/ricardo/.espressif/v6.1/esp-idf/components/esp_rom /home/ricardo/.espressif/v6.1/esp-idf/components/esp_security /home/ricardo/.espressif/v6.1/esp-idf/components/esp_stdio /home/ricardo/.espressif/v6.1/esp-idf/components/esp_system /home/ricardo/.espressif/v6.1/esp-idf/components/esp_timer /home/ricardo/.espressif/v6.1/esp-idf/components/esp_usb_cdc_rom_console /home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/Reflow-plate/managed_components/espressif__esp_lcd_touch /home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/Reflow-plate/managed_components/espressif__esp_lvgl_port /home/ricardo/.espressif/v6.1/esp-idf/components/esptool_py /home/ricardo/.espressif/v6.1/esp-idf/components/freertos /home/ricardo/.espressif/v6.1/esp-idf/components/hal /home/ricardo/.espressif/v6.1/esp-idf/components/heap /home/ricardo/.espressif/v6.1/esp-idf/components/log /home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/Reflow-plate/managed_components/lvgl__lvgl /home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/Reflow-plate/main /home/ricardo/.espressif/v6.1/esp-idf/components/mbedtls /home/ricardo/.espressif/v6.1/esp-idf/components/partition_table /home/ricardo/.espressif/v6.1/esp-idf/components/pthread /home/ricardo/.espressif/v6.1/esp-idf/components/soc /home/ricardo/.espressif/v6.1/esp-idf/components/spi_flash /home/ricardo/.espressif/v6.1/esp-idf/components/xtensa
|
||||
-- Configuring done (20.3s)
|
||||
-- Generating done (0.6s)
|
||||
-- Build files have been written to: /home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/Reflow-plate/build
|
||||
1556
build/log/idf_py_stdout_output_51271
Normal file
1556
build/log/idf_py_stdout_output_51271
Normal file
File diff suppressed because it is too large
Load Diff
8
build/log/idf_py_stdout_output_56560
Normal file
8
build/log/idf_py_stdout_output_56560
Normal file
@@ -0,0 +1,8 @@
|
||||
Command: ninja all
|
||||
[1/4] cd "/home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/Reflow-plate/build" && /home/ricardo/.espressif/tools/python/v6.1/venv/bin/python /home/ricardo/.espressif/v6.1/esp-idf/components/partition_table/check_sizes.py --offset 0x8000 partition --type app /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/Reflow-plate/build/partition_table/partition-table.bin /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/Reflow-plate/build/ReflowPlate.bin
|
||||
ReflowPlate.bin binary size 0x75900 bytes. Smallest app partition is 0x100000 bytes. 0x8a700 bytes (54%) free.
|
||||
[2/4] Performing build step for 'bootloader'
|
||||
[1/1] cd "/home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/Reflow-plate/build/bootloader" && /home/ricardo/.espressif/tools/python/v6.1/venv/bin/python /home/ricardo/.espressif/v6.1/esp-idf/components/partition_table/check_sizes.py --offset 0x8000 bootloader 0x1000 /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/Reflow-plate/build/bootloader/bootloader.bin
|
||||
Bootloader binary size 0x6640 bytes. 0x9c0 bytes (9%) free.
|
||||
[3/4] No install step for 'bootloader'
|
||||
[4/4] Completed 'bootloader'
|
||||
@@ -1,8 +1,8 @@
|
||||
Command: ninja flash
|
||||
[1/5] cd "/home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/V0.1/build" && /home/ricardo/.espressif/tools/python/v6.1/venv/bin/python /home/ricardo/.espressif/v6.1/esp-idf/components/partition_table/check_sizes.py --offset 0x8000 partition --type app /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/V0.1/build/partition_table/partition-table.bin /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/V0.1/build/ReflowPlate.bin
|
||||
ReflowPlate.bin binary size 0x75bb0 bytes. Smallest app partition is 0x100000 bytes. 0x8a450 bytes (54%) free.
|
||||
[1/5] cd "/home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/Reflow-plate/build" && /home/ricardo/.espressif/tools/python/v6.1/venv/bin/python /home/ricardo/.espressif/v6.1/esp-idf/components/partition_table/check_sizes.py --offset 0x8000 partition --type app /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/Reflow-plate/build/partition_table/partition-table.bin /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/Reflow-plate/build/ReflowPlate.bin
|
||||
ReflowPlate.bin binary size 0x75900 bytes. Smallest app partition is 0x100000 bytes. 0x8a700 bytes (54%) free.
|
||||
[2/5] Performing build step for 'bootloader'
|
||||
[1/1] cd "/home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/V0.1/build/bootloader" && /home/ricardo/.espressif/tools/python/v6.1/venv/bin/python /home/ricardo/.espressif/v6.1/esp-idf/components/partition_table/check_sizes.py --offset 0x8000 bootloader 0x1000 /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/V0.1/build/bootloader/bootloader.bin
|
||||
[1/1] cd "/home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/Reflow-plate/build/bootloader" && /home/ricardo/.espressif/tools/python/v6.1/venv/bin/python /home/ricardo/.espressif/v6.1/esp-idf/components/partition_table/check_sizes.py --offset 0x8000 bootloader 0x1000 /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/Reflow-plate/build/bootloader/bootloader.bin
|
||||
Bootloader binary size 0x6640 bytes. 0x9c0 bytes (9%) free.
|
||||
[3/5] No install step for 'bootloader'
|
||||
[4/5] Completed 'bootloader'
|
||||
@@ -10,7 +10,7 @@ Bootloader binary size 0x6640 bytes. 0x9c0 bytes (9%) free.
|
||||
esptool --chip esp32 -p /dev/ttyUSB0 -b 460800 --before=default-reset --after=hard-reset write-flash --flash-mode dio --flash-freq 40m --flash-size 2MB 0x1000 bootloader/bootloader.bin 0x8000 partition_table/partition-table.bin 0x10000 ReflowPlate.bin --skip-flashed
|
||||
esptool v5.4.0
|
||||
Serial port /dev/ttyUSB0:
|
||||
Connecting......
|
||||
Connecting....
|
||||
[1A[2K[1A[2KConnected to ESP32 on /dev/ttyUSB0:
|
||||
Chip type: ESP32-D0WD-V3 (revision v3.1)
|
||||
Features: Wi-Fi, BT, Dual Core + LP Core, 240MHz, Vref calibration in eFuse, Coding Scheme None
|
||||
@@ -29,9 +29,9 @@ Writing 'bootloader/bootloader.bin' at 0x00001000...
|
||||
SHA digest in image updated.
|
||||
Comparing flash contents against new data...
|
||||
[1A[2KFlash will be erased from 0x00001000 to 0x00007fff...
|
||||
Compressed 26176 bytes to 16579...
|
||||
[2KWriting at 0x00007539 [38;2;249;38;114m━━━━━━━━━━━━━━━━━━━━━━━━━━━━━[0m[38;2;249;38;114m╸[0m 98.8% 16.00kB/16.19kB [0s]
[2KWriting at 0x00007640 [38;2;114;156;31m━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━[0m 100.0% 16.19kB/16.19kB [0s]
|
||||
[1A[2K[1A[2KWrote 26176 bytes (16579 compressed) at 0x00001000 in 0.7 seconds (282.6 kbit/s).
|
||||
Compressed 26176 bytes to 16575...
|
||||
[2KWriting at 0x0000753a [38;2;249;38;114m━━━━━━━━━━━━━━━━━━━━━━━━━━━━━[0m[38;2;249;38;114m╸[0m 98.8% 16.00kB/16.19kB [0s]
[2KWriting at 0x00007640 [38;2;114;156;31m━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━[0m 100.0% 16.19kB/16.19kB [0s]
|
||||
[1A[2K[1A[2KWrote 26176 bytes (16575 compressed) at 0x00001000 in 0.7 seconds (288.8 kbit/s).
|
||||
Verifying written data...
|
||||
[1A[2KHash of data verified.
|
||||
|
||||
@@ -42,9 +42,9 @@ Comparing flash contents against new data...
|
||||
Writing 'ReflowPlate.bin' at 0x00010000...
|
||||
Comparing flash contents against new data...
|
||||
[1A[2KFlash will be erased from 0x00010000 to 0x00085fff...
|
||||
Compressed 482224 bytes to 291193...
|
||||
[2KWriting at 0x0001b927 [38;2;249;38;114m━[0m[38;2;249;38;114m╸[0m[38;5;237m━━━━━━━━━━━━━━━━━━━━━━━━━━━━[0m 5.6% 16.00kB/284.37kB [0s]
[2KWriting at 0x00024081 [38;2;249;38;114m━━━[0m[38;5;237m╺[0m[38;5;237m━━━━━━━━━━━━━━━━━━━━━━━━━━[0m 11.3% 32.00kB/284.37kB [0s]
[2KWriting at 0x00029e97 [38;2;249;38;114m━━━━━[0m[38;5;237m╺[0m[38;5;237m━━━━━━━━━━━━━━━━━━━━━━━━[0m 16.9% 48.00kB/284.37kB [1s]
[2KWriting at 0x00030129 [38;2;249;38;114m━━━━━━[0m[38;2;249;38;114m╸[0m[38;5;237m━━━━━━━━━━━━━━━━━━━━━━━[0m 22.5% 64.00kB/284.37kB [1s]
[2KWriting at 0x00035843 [38;2;249;38;114m━━━━━━━━[0m[38;5;237m╺[0m[38;5;237m━━━━━━━━━━━━━━━━━━━━━[0m 28.1% 80.00kB/284.37kB [2s]
[2KWriting at 0x0003b57c [38;2;249;38;114m━━━━━━━━━━[0m[38;5;237m╺[0m[38;5;237m━━━━━━━━━━━━━━━━━━━[0m 33.8% 96.00kB/284.37kB [2s]
[2KWriting at 0x000411a3 [38;2;249;38;114m━━━━━━━━━━━[0m[38;2;249;38;114m╸[0m[38;5;237m━━━━━━━━━━━━━━━━━━[0m 39.4% 112.00kB/284.37kB [2s]
[2KWriting at 0x00046ca4 [38;2;249;38;114m━━━━━━━━━━━━━[0m[38;2;249;38;114m╸[0m[38;5;237m━━━━━━━━━━━━━━━━[0m 45.0% 128.00kB/284.37kB [3s]
[2KWriting at 0x0004da6c [38;2;249;38;114m━━━━━━━━━━━━━━━[0m[38;5;237m╺[0m[38;5;237m━━━━━━━━━━━━━━[0m 50.6% 144.00kB/284.37kB [3s]
[2KWriting at 0x00053294 [38;2;249;38;114m━━━━━━━━━━━━━━━━[0m[38;2;249;38;114m╸[0m[38;5;237m━━━━━━━━━━━━━[0m 56.3% 160.00kB/284.37kB [4s]
[2KWriting at 0x00058eac [38;2;249;38;114m━━━━━━━━━━━━━━━━━━[0m[38;2;249;38;114m╸[0m[38;5;237m━━━━━━━━━━━[0m 61.9% 176.00kB/284.37kB [4s]
[2KWriting at 0x0005ec69 [38;2;249;38;114m━━━━━━━━━━━━━━━━━━━━[0m[38;5;237m╺[0m[38;5;237m━━━━━━━━━[0m 67.5% 192.00kB/284.37kB [4s]
[2KWriting at 0x00064e65 [38;2;249;38;114m━━━━━━━━━━━━━━━━━━━━━[0m[38;2;249;38;114m╸[0m[38;5;237m━━━━━━━━[0m 73.1% 208.00kB/284.37kB [5s]
[2KWriting at 0x0006b695 [38;2;249;38;114m━━━━━━━━━━━━━━━━━━━━━━━[0m[38;2;249;38;114m╸[0m[38;5;237m━━━━━━[0m 78.8% 224.00kB/284.37kB [5s]
[2KWriting at 0x00073604 [38;2;249;38;114m━━━━━━━━━━━━━━━━━━━━━━━━━[0m[38;5;237m╺[0m[38;5;237m━━━━[0m 84.4% 240.00kB/284.37kB [6s]
[2KWriting at 0x0007a6d9 [38;2;249;38;114m━━━━━━━━━━━━━━━━━━━━━━━━━━━[0m[38;5;237m╺[0m[38;5;237m━━[0m 90.0% 256.00kB/284.37kB [6s]
[2KWriting at 0x00080e19 [38;2;249;38;114m━━━━━━━━━━━━━━━━━━━━━━━━━━━━[0m[38;2;249;38;114m╸[0m[38;5;237m━[0m 95.7% 272.00kB/284.37kB [6s]
[2KWriting at 0x00085bb0 [38;2;114;156;31m━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━[0m 100.0% 284.37kB/284.37kB [7s]
|
||||
[1A[2K[1A[2KWrote 482224 bytes (291193 compressed) at 0x00010000 in 7.4 seconds (524.3 kbit/s).
|
||||
Compressed 481536 bytes to 290773...
|
||||
[2KWriting at 0x0001b818 [38;2;249;38;114m━[0m[38;2;249;38;114m╸[0m[38;5;237m━━━━━━━━━━━━━━━━━━━━━━━━━━━━[0m 5.6% 16.00kB/283.96kB [0s]
[2KWriting at 0x00023f9d [38;2;249;38;114m━━━[0m[38;5;237m╺[0m[38;5;237m━━━━━━━━━━━━━━━━━━━━━━━━━━[0m 11.3% 32.00kB/283.96kB [0s]
[2KWriting at 0x00029e10 [38;2;249;38;114m━━━━━[0m[38;5;237m╺[0m[38;5;237m━━━━━━━━━━━━━━━━━━━━━━━━[0m 16.9% 48.00kB/283.96kB [1s]
[2KWriting at 0x000300ee [38;2;249;38;114m━━━━━━[0m[38;2;249;38;114m╸[0m[38;5;237m━━━━━━━━━━━━━━━━━━━━━━━[0m 22.5% 64.00kB/283.96kB [1s]
[2KWriting at 0x000357fa [38;2;249;38;114m━━━━━━━━[0m[38;5;237m╺[0m[38;5;237m━━━━━━━━━━━━━━━━━━━━━[0m 28.2% 80.00kB/283.96kB [1s]
[2KWriting at 0x0003b572 [38;2;249;38;114m━━━━━━━━━━[0m[38;5;237m╺[0m[38;5;237m━━━━━━━━━━━━━━━━━━━[0m 33.8% 96.00kB/283.96kB [2s]
[2KWriting at 0x0004117f [38;2;249;38;114m━━━━━━━━━━━[0m[38;2;249;38;114m╸[0m[38;5;237m━━━━━━━━━━━━━━━━━━[0m 39.4% 112.00kB/283.96kB [2s]
[2KWriting at 0x00046c8c [38;2;249;38;114m━━━━━━━━━━━━━[0m[38;2;249;38;114m╸[0m[38;5;237m━━━━━━━━━━━━━━━━[0m 45.1% 128.00kB/283.96kB [3s]
[2KWriting at 0x0004da7a [38;2;249;38;114m━━━━━━━━━━━━━━━[0m[38;5;237m╺[0m[38;5;237m━━━━━━━━━━━━━━[0m 50.7% 144.00kB/283.96kB [3s]
[2KWriting at 0x00053278 [38;2;249;38;114m━━━━━━━━━━━━━━━━[0m[38;2;249;38;114m╸[0m[38;5;237m━━━━━━━━━━━━━[0m 56.3% 160.00kB/283.96kB [3s]
[2KWriting at 0x00058e96 [38;2;249;38;114m━━━━━━━━━━━━━━━━━━[0m[38;2;249;38;114m╸[0m[38;5;237m━━━━━━━━━━━[0m 62.0% 176.00kB/283.96kB [4s]
[2KWriting at 0x0005ec47 [38;2;249;38;114m━━━━━━━━━━━━━━━━━━━━[0m[38;5;237m╺[0m[38;5;237m━━━━━━━━━[0m 67.6% 192.00kB/283.96kB [4s]
[2KWriting at 0x00064e43 [38;2;249;38;114m━━━━━━━━━━━━━━━━━━━━━[0m[38;2;249;38;114m╸[0m[38;5;237m━━━━━━━━[0m 73.3% 208.00kB/283.96kB [5s]
[2KWriting at 0x0006b685 [38;2;249;38;114m━━━━━━━━━━━━━━━━━━━━━━━[0m[38;2;249;38;114m╸[0m[38;5;237m━━━━━━[0m 78.9% 224.00kB/283.96kB [5s]
[2KWriting at 0x0007364a [38;2;249;38;114m━━━━━━━━━━━━━━━━━━━━━━━━━[0m[38;5;237m╺[0m[38;5;237m━━━━[0m 84.5% 240.00kB/283.96kB [6s]
[2KWriting at 0x0007a6cb [38;2;249;38;114m━━━━━━━━━━━━━━━━━━━━━━━━━━━[0m[38;5;237m╺[0m[38;5;237m━━[0m 90.2% 256.00kB/283.96kB [6s]
[2KWriting at 0x00080e54 [38;2;249;38;114m━━━━━━━━━━━━━━━━━━━━━━━━━━━━[0m[38;2;249;38;114m╸[0m[38;5;237m━[0m 95.8% 272.00kB/283.96kB [6s]
[2KWriting at 0x00085900 [38;2;114;156;31m━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━[0m 100.0% 283.96kB/283.96kB [7s]
|
||||
[1A[2K[1A[2KWrote 481536 bytes (290773 compressed) at 0x00010000 in 7.3 seconds (530.4 kbit/s).
|
||||
Verifying written data...
|
||||
[1A[2KHash of data verified.
|
||||
|
||||
19
build/log/idf_py_stdout_output_56750
Normal file
19
build/log/idf_py_stdout_output_56750
Normal file
@@ -0,0 +1,19 @@
|
||||
Command: ninja all
|
||||
[1/9] Performing build step for 'bootloader'
|
||||
[1/1] cd "/home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/Reflow-plate/build/bootloader" && /home/ricardo/.espressif/tools/python/v6.1/venv/bin/python /home/ricardo/.espressif/v6.1/esp-idf/components/partition_table/check_sizes.py --offset 0x8000 bootloader 0x1000 /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/Reflow-plate/build/bootloader/bootloader.bin
|
||||
Bootloader binary size 0x6640 bytes. 0x9c0 bytes (9%) free.
|
||||
[2/9] No install step for 'bootloader'
|
||||
[3/9] Completed 'bootloader'
|
||||
[4/9] Building C object esp-idf/main/CMakeFiles/__idf_main.dir/main.c.obj
|
||||
[5/9] Linking C static library esp-idf/main/libmain.a
|
||||
[6/9] Generating esp-idf/esp_system/ld/sections.ld
|
||||
Skipping linker script generation, section names unchanged
|
||||
[7/9] Linking CXX executable ReflowPlate.elf
|
||||
[8/9] Generating binary image from built executable
|
||||
esptool v5.4.0
|
||||
Creating ESP32 image...
|
||||
Merged 3 ELF sections.
|
||||
Successfully created ESP32 image.
|
||||
Generated /home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/Reflow-plate/build/ReflowPlate.bin
|
||||
[9/9] cd "/home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/Reflow-plate/build" && /home/ricardo/.espressif/tools/python/v6.1/venv/bin/python /home/ricardo/.espressif/v6.1/esp-idf/components/partition_table/check_sizes.py --offset 0x8000 partition --type app /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/Reflow-plate/build/partition_table/partition-table.bin /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/Reflow-plate/build/ReflowPlate.bin
|
||||
ReflowPlate.bin binary size 0x75910 bytes. Smallest app partition is 0x100000 bytes. 0x8a6f0 bytes (54%) free.
|
||||
8
build/log/idf_py_stdout_output_56903
Normal file
8
build/log/idf_py_stdout_output_56903
Normal file
@@ -0,0 +1,8 @@
|
||||
Command: ninja all
|
||||
[1/4] cd "/home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/Reflow-plate/build" && /home/ricardo/.espressif/tools/python/v6.1/venv/bin/python /home/ricardo/.espressif/v6.1/esp-idf/components/partition_table/check_sizes.py --offset 0x8000 partition --type app /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/Reflow-plate/build/partition_table/partition-table.bin /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/Reflow-plate/build/ReflowPlate.bin
|
||||
ReflowPlate.bin binary size 0x75910 bytes. Smallest app partition is 0x100000 bytes. 0x8a6f0 bytes (54%) free.
|
||||
[2/4] Performing build step for 'bootloader'
|
||||
[1/1] cd "/home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/Reflow-plate/build/bootloader" && /home/ricardo/.espressif/tools/python/v6.1/venv/bin/python /home/ricardo/.espressif/v6.1/esp-idf/components/partition_table/check_sizes.py --offset 0x8000 bootloader 0x1000 /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/Reflow-plate/build/bootloader/bootloader.bin
|
||||
Bootloader binary size 0x6640 bytes. 0x9c0 bytes (9%) free.
|
||||
[3/4] No install step for 'bootloader'
|
||||
[4/4] Completed 'bootloader'
|
||||
73
build/log/idf_py_stdout_output_56913
Normal file
73
build/log/idf_py_stdout_output_56913
Normal file
@@ -0,0 +1,73 @@
|
||||
Command: ninja flash
|
||||
[1/5] cd "/home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/Reflow-plate/build" && /home/ricardo/.espressif/tools/python/v6.1/venv/bin/python /home/ricardo/.espressif/v6.1/esp-idf/components/partition_table/check_sizes.py --offset 0x8000 partition --type app /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/Reflow-plate/build/partition_table/partition-table.bin /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/Reflow-plate/build/ReflowPlate.bin
|
||||
ReflowPlate.bin binary size 0x75910 bytes. Smallest app partition is 0x100000 bytes. 0x8a6f0 bytes (54%) free.
|
||||
[2/5] Performing build step for 'bootloader'
|
||||
[1/1] cd "/home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/Reflow-plate/build/bootloader" && /home/ricardo/.espressif/tools/python/v6.1/venv/bin/python /home/ricardo/.espressif/v6.1/esp-idf/components/partition_table/check_sizes.py --offset 0x8000 bootloader 0x1000 /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/Reflow-plate/build/bootloader/bootloader.bin
|
||||
Bootloader binary size 0x6640 bytes. 0x9c0 bytes (9%) free.
|
||||
[3/5] No install step for 'bootloader'
|
||||
[4/5] Completed 'bootloader'
|
||||
[4/5] Running utility command for flash
|
||||
esptool --chip esp32 -p /dev/ttyUSB0 -b 460800 --before=default-reset --after=hard-reset write-flash --flash-mode dio --flash-freq 40m --flash-size 2MB 0x1000 bootloader/bootloader.bin 0x8000 partition_table/partition-table.bin 0x10000 ReflowPlate.bin --diff-with bootloader/bootloader_flashed.bin partition_table/partition-table_flashed.bin ReflowPlate_flashed.bin
|
||||
esptool v5.4.0
|
||||
Serial port /dev/ttyUSB0:
|
||||
Connecting.....
|
||||
[1A[2K[1A[2KConnected to ESP32 on /dev/ttyUSB0:
|
||||
Chip type: ESP32-D0WD-V3 (revision v3.1)
|
||||
Features: Wi-Fi, BT, Dual Core + LP Core, 240MHz, Vref calibration in eFuse, Coding Scheme None
|
||||
Crystal frequency: 40MHz
|
||||
MAC: 6c:c8:40:46:0c:d4
|
||||
|
||||
Uploading stub flasher...
|
||||
Running stub flasher...
|
||||
[1A[2K[1A[2KStub flasher running.
|
||||
Changing baud rate to 460800...
|
||||
Changed.
|
||||
|
||||
Configuring flash size...
|
||||
|
||||
Writing 'bootloader/bootloader.bin' at 0x00001000...
|
||||
SHA digest in image updated.
|
||||
SHA digest in image updated.
|
||||
No changed sectors found, verifying if data is in flash...
|
||||
[1A[2K'bootloader/bootloader.bin' at 0x00001000 verified.
|
||||
|
||||
Writing 'partition_table/partition-table.bin' at 0x00008000...
|
||||
No changed sectors found, verifying if data is in flash...
|
||||
[1A[2K'partition_table/partition-table.bin' at 0x00008000 verified.
|
||||
|
||||
Writing 'ReflowPlate.bin' at 0x00010000...
|
||||
Changed data sectors found, fast reflashing...
|
||||
Reflashing 1 changed sector at 0x00010000...
|
||||
Flash will be erased from 0x00010000 to 0x00010fff...
|
||||
Compressed 4096 bytes to 1887...
|
||||
|
||||
[2KWriting at 0x00011000 [38;2;114;156;31m━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━[0m 100.0% 1.84kB/1.84kB [0s]
|
||||
[1A[2K[1A[2KWrote 4096 bytes (1887 compressed) at 0x00010000 in 0.0 seconds (696.3 kbit/s).
|
||||
Reflashing 1 changed sector at 0x00018000...
|
||||
Flash will be erased from 0x00018000 to 0x00018fff...
|
||||
Compressed 4096 bytes to 1775...
|
||||
|
||||
[2KWriting at 0x00019000 [38;2;114;156;31m━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━[0m 100.0% 1.73kB/1.73kB [0s]
|
||||
[1A[2K[1A[2KWrote 4096 bytes (1775 compressed) at 0x00018000 in 0.0 seconds (670.3 kbit/s).
|
||||
Reflashing 1 changed sector at 0x0001a000...
|
||||
Flash will be erased from 0x0001a000 to 0x0001afff...
|
||||
Compressed 4096 bytes to 1586...
|
||||
|
||||
[2KWriting at 0x0001b000 [38;2;114;156;31m━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━[0m 100.0% 1.55kB/1.55kB [0s]
|
||||
[1A[2K[1A[2KWrote 4096 bytes (1586 compressed) at 0x0001a000 in 0.0 seconds (698.4 kbit/s).
|
||||
Reflashing 4 changed sectors at 0x0001d000...
|
||||
Flash will be erased from 0x0001d000 to 0x00020fff...
|
||||
Compressed 16384 bytes to 7628...
|
||||
|
||||
[2KWriting at 0x00021000 [38;2;114;156;31m━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━[0m 100.0% 7.45kB/7.45kB [0s]
|
||||
[1A[2K[1A[2KWrote 16384 bytes (7628 compressed) at 0x0001d000 in 0.2 seconds (645.2 kbit/s).
|
||||
Reflashing 1 changed sector at 0x00023000...
|
||||
Flash will be erased from 0x00023000 to 0x00023fff...
|
||||
Compressed 4096 bytes to 2291...
|
||||
|
||||
[2KWriting at 0x00024000 [38;2;114;156;31m━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━[0m 100.0% 2.24kB/2.24kB [0s]
|
||||
[1A[2K[1A[2KWrote 4096 bytes (2291 compressed) at 0x00023000 in 0.1 seconds (492.7 kbit/s).
|
||||
Reflashing 86 changed sectors at 0x00030000...
|
||||
Flash will be erased from 0x00030000 to 0x00085fff...
|
||||
Compressed 352256 bytes to 225675...
|
||||
|
||||
19
build/log/idf_py_stdout_output_56980
Normal file
19
build/log/idf_py_stdout_output_56980
Normal file
@@ -0,0 +1,19 @@
|
||||
Command: ninja all
|
||||
[1/9] Performing build step for 'bootloader'
|
||||
[1/1] cd "/home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/Reflow-plate/build/bootloader" && /home/ricardo/.espressif/tools/python/v6.1/venv/bin/python /home/ricardo/.espressif/v6.1/esp-idf/components/partition_table/check_sizes.py --offset 0x8000 bootloader 0x1000 /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/Reflow-plate/build/bootloader/bootloader.bin
|
||||
Bootloader binary size 0x6640 bytes. 0x9c0 bytes (9%) free.
|
||||
[2/9] No install step for 'bootloader'
|
||||
[3/9] Completed 'bootloader'
|
||||
[4/9] Building C object esp-idf/main/CMakeFiles/__idf_main.dir/main.c.obj
|
||||
[5/9] Linking C static library esp-idf/main/libmain.a
|
||||
[6/9] Generating esp-idf/esp_system/ld/sections.ld
|
||||
Skipping linker script generation, section names unchanged
|
||||
[7/9] Linking CXX executable ReflowPlate.elf
|
||||
[8/9] Generating binary image from built executable
|
||||
esptool v5.4.0
|
||||
Creating ESP32 image...
|
||||
Merged 3 ELF sections.
|
||||
Successfully created ESP32 image.
|
||||
Generated /home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/Reflow-plate/build/ReflowPlate.bin
|
||||
[9/9] cd "/home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/Reflow-plate/build" && /home/ricardo/.espressif/tools/python/v6.1/venv/bin/python /home/ricardo/.espressif/v6.1/esp-idf/components/partition_table/check_sizes.py --offset 0x8000 partition --type app /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/Reflow-plate/build/partition_table/partition-table.bin /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/Reflow-plate/build/ReflowPlate.bin
|
||||
ReflowPlate.bin binary size 0x75900 bytes. Smallest app partition is 0x100000 bytes. 0x8a700 bytes (54%) free.
|
||||
8
build/log/idf_py_stdout_output_57142
Normal file
8
build/log/idf_py_stdout_output_57142
Normal file
@@ -0,0 +1,8 @@
|
||||
Command: ninja all
|
||||
[1/4] cd "/home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/Reflow-plate/build" && /home/ricardo/.espressif/tools/python/v6.1/venv/bin/python /home/ricardo/.espressif/v6.1/esp-idf/components/partition_table/check_sizes.py --offset 0x8000 partition --type app /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/Reflow-plate/build/partition_table/partition-table.bin /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/Reflow-plate/build/ReflowPlate.bin
|
||||
ReflowPlate.bin binary size 0x75900 bytes. Smallest app partition is 0x100000 bytes. 0x8a700 bytes (54%) free.
|
||||
[2/4] Performing build step for 'bootloader'
|
||||
[1/1] cd "/home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/Reflow-plate/build/bootloader" && /home/ricardo/.espressif/tools/python/v6.1/venv/bin/python /home/ricardo/.espressif/v6.1/esp-idf/components/partition_table/check_sizes.py --offset 0x8000 bootloader 0x1000 /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/Reflow-plate/build/bootloader/bootloader.bin
|
||||
Bootloader binary size 0x6640 bytes. 0x9c0 bytes (9%) free.
|
||||
[3/4] No install step for 'bootloader'
|
||||
[4/4] Completed 'bootloader'
|
||||
68
build/log/idf_py_stdout_output_57152
Normal file
68
build/log/idf_py_stdout_output_57152
Normal file
@@ -0,0 +1,68 @@
|
||||
Command: ninja flash
|
||||
[1/5] cd "/home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/Reflow-plate/build" && /home/ricardo/.espressif/tools/python/v6.1/venv/bin/python /home/ricardo/.espressif/v6.1/esp-idf/components/partition_table/check_sizes.py --offset 0x8000 partition --type app /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/Reflow-plate/build/partition_table/partition-table.bin /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/Reflow-plate/build/ReflowPlate.bin
|
||||
ReflowPlate.bin binary size 0x75900 bytes. Smallest app partition is 0x100000 bytes. 0x8a700 bytes (54%) free.
|
||||
[2/5] Performing build step for 'bootloader'
|
||||
[1/1] cd "/home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/Reflow-plate/build/bootloader" && /home/ricardo/.espressif/tools/python/v6.1/venv/bin/python /home/ricardo/.espressif/v6.1/esp-idf/components/partition_table/check_sizes.py --offset 0x8000 bootloader 0x1000 /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/Reflow-plate/build/bootloader/bootloader.bin
|
||||
Bootloader binary size 0x6640 bytes. 0x9c0 bytes (9%) free.
|
||||
[3/5] No install step for 'bootloader'
|
||||
[4/5] Completed 'bootloader'
|
||||
[4/5] Running utility command for flash
|
||||
esptool --chip esp32 -p /dev/ttyUSB0 -b 460800 --before=default-reset --after=hard-reset write-flash --flash-mode dio --flash-freq 40m --flash-size 2MB 0x1000 bootloader/bootloader.bin 0x8000 partition_table/partition-table.bin 0x10000 ReflowPlate.bin --diff-with bootloader/bootloader_flashed.bin partition_table/partition-table_flashed.bin ReflowPlate_flashed.bin
|
||||
esptool v5.4.0
|
||||
Serial port /dev/ttyUSB0:
|
||||
Connecting....
|
||||
[1A[2K[1A[2KConnected to ESP32 on /dev/ttyUSB0:
|
||||
Chip type: ESP32-D0WD-V3 (revision v3.1)
|
||||
Features: Wi-Fi, BT, Dual Core + LP Core, 240MHz, Vref calibration in eFuse, Coding Scheme None
|
||||
Crystal frequency: 40MHz
|
||||
MAC: 6c:c8:40:46:0c:d4
|
||||
|
||||
Uploading stub flasher...
|
||||
Running stub flasher...
|
||||
[1A[2K[1A[2KStub flasher running.
|
||||
Changing baud rate to 460800...
|
||||
Changed.
|
||||
|
||||
Configuring flash size...
|
||||
|
||||
Writing 'bootloader/bootloader.bin' at 0x00001000...
|
||||
SHA digest in image updated.
|
||||
SHA digest in image updated.
|
||||
No changed sectors found, verifying if data is in flash...
|
||||
[1A[2K'bootloader/bootloader.bin' at 0x00001000 verified.
|
||||
|
||||
Writing 'partition_table/partition-table.bin' at 0x00008000...
|
||||
No changed sectors found, verifying if data is in flash...
|
||||
[1A[2K'partition_table/partition-table.bin' at 0x00008000 verified.
|
||||
|
||||
Writing 'ReflowPlate.bin' at 0x00010000...
|
||||
Changed data sectors found, fast reflashing...
|
||||
Reflashing 1 changed sector at 0x00010000...
|
||||
Flash will be erased from 0x00010000 to 0x00010fff...
|
||||
Compressed 4096 bytes to 1889...
|
||||
|
||||
[2KWriting at 0x00011000 [38;2;114;156;31m━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━[0m 100.0% 1.84kB/1.84kB [0s]
|
||||
[1A[2K[1A[2KWrote 4096 bytes (1889 compressed) at 0x00010000 in 0.0 seconds (684.8 kbit/s).
|
||||
Reflashing 1 changed sector at 0x0001a000...
|
||||
Flash will be erased from 0x0001a000 to 0x0001afff...
|
||||
Compressed 4096 bytes to 1584...
|
||||
|
||||
[2KWriting at 0x0001b000 [38;2;114;156;31m━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━[0m 100.0% 1.55kB/1.55kB [0s]
|
||||
[1A[2K[1A[2KWrote 4096 bytes (1584 compressed) at 0x0001a000 in 0.0 seconds (731.6 kbit/s).
|
||||
Reflashing 4 changed sectors at 0x0001d000...
|
||||
Flash will be erased from 0x0001d000 to 0x00020fff...
|
||||
Compressed 16384 bytes to 7626...
|
||||
|
||||
[2KWriting at 0x00021000 [38;2;114;156;31m━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━[0m 100.0% 7.45kB/7.45kB [0s]
|
||||
[1A[2K[1A[2KWrote 16384 bytes (7626 compressed) at 0x0001d000 in 0.2 seconds (655.6 kbit/s).
|
||||
Reflashing 1 changed sector at 0x00023000...
|
||||
Flash will be erased from 0x00023000 to 0x00023fff...
|
||||
Compressed 4096 bytes to 2293...
|
||||
|
||||
[2KWriting at 0x00024000 [38;2;114;156;31m━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━[0m 100.0% 2.24kB/2.24kB [0s]
|
||||
[1A[2K[1A[2KWrote 4096 bytes (2293 compressed) at 0x00023000 in 0.1 seconds (526.8 kbit/s).
|
||||
Reflashing 86 changed sectors at 0x00030000...
|
||||
Flash will be erased from 0x00030000 to 0x00085fff...
|
||||
Compressed 352256 bytes to 225691...
|
||||
|
||||
[2KWriting at 0x000355be [38;2;249;38;114m━━[0m[38;5;237m╺[0m[38;5;237m━━━━━━━━━━━━━━━━━━━━━━━━━━━[0m 7.3% 16.00kB/220.40kB [0s]
|
||||
19
build/log/idf_py_stdout_output_57240
Normal file
19
build/log/idf_py_stdout_output_57240
Normal file
@@ -0,0 +1,19 @@
|
||||
Command: ninja all
|
||||
[1/9] Performing build step for 'bootloader'
|
||||
[1/1] cd "/home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/Reflow-plate/build/bootloader" && /home/ricardo/.espressif/tools/python/v6.1/venv/bin/python /home/ricardo/.espressif/v6.1/esp-idf/components/partition_table/check_sizes.py --offset 0x8000 bootloader 0x1000 /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/Reflow-plate/build/bootloader/bootloader.bin
|
||||
Bootloader binary size 0x6640 bytes. 0x9c0 bytes (9%) free.
|
||||
[2/9] No install step for 'bootloader'
|
||||
[3/9] Completed 'bootloader'
|
||||
[4/9] Building C object esp-idf/main/CMakeFiles/__idf_main.dir/main.c.obj
|
||||
[5/9] Linking C static library esp-idf/main/libmain.a
|
||||
[6/9] Generating esp-idf/esp_system/ld/sections.ld
|
||||
Skipping linker script generation, section names unchanged
|
||||
[7/9] Linking CXX executable ReflowPlate.elf
|
||||
[8/9] Generating binary image from built executable
|
||||
esptool v5.4.0
|
||||
Creating ESP32 image...
|
||||
Merged 3 ELF sections.
|
||||
Successfully created ESP32 image.
|
||||
Generated /home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/Reflow-plate/build/ReflowPlate.bin
|
||||
[9/9] cd "/home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/Reflow-plate/build" && /home/ricardo/.espressif/tools/python/v6.1/venv/bin/python /home/ricardo/.espressif/v6.1/esp-idf/components/partition_table/check_sizes.py --offset 0x8000 partition --type app /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/Reflow-plate/build/partition_table/partition-table.bin /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/Reflow-plate/build/ReflowPlate.bin
|
||||
ReflowPlate.bin binary size 0x75900 bytes. Smallest app partition is 0x100000 bytes. 0x8a700 bytes (54%) free.
|
||||
8
build/log/idf_py_stdout_output_57393
Normal file
8
build/log/idf_py_stdout_output_57393
Normal file
@@ -0,0 +1,8 @@
|
||||
Command: ninja all
|
||||
[1/4] cd "/home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/Reflow-plate/build" && /home/ricardo/.espressif/tools/python/v6.1/venv/bin/python /home/ricardo/.espressif/v6.1/esp-idf/components/partition_table/check_sizes.py --offset 0x8000 partition --type app /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/Reflow-plate/build/partition_table/partition-table.bin /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/Reflow-plate/build/ReflowPlate.bin
|
||||
ReflowPlate.bin binary size 0x75900 bytes. Smallest app partition is 0x100000 bytes. 0x8a700 bytes (54%) free.
|
||||
[2/4] Performing build step for 'bootloader'
|
||||
[1/1] cd "/home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/Reflow-plate/build/bootloader" && /home/ricardo/.espressif/tools/python/v6.1/venv/bin/python /home/ricardo/.espressif/v6.1/esp-idf/components/partition_table/check_sizes.py --offset 0x8000 bootloader 0x1000 /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/Reflow-plate/build/bootloader/bootloader.bin
|
||||
Bootloader binary size 0x6640 bytes. 0x9c0 bytes (9%) free.
|
||||
[3/4] No install step for 'bootloader'
|
||||
[4/4] Completed 'bootloader'
|
||||
68
build/log/idf_py_stdout_output_57404
Normal file
68
build/log/idf_py_stdout_output_57404
Normal file
@@ -0,0 +1,68 @@
|
||||
Command: ninja flash
|
||||
[1/5] cd "/home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/Reflow-plate/build" && /home/ricardo/.espressif/tools/python/v6.1/venv/bin/python /home/ricardo/.espressif/v6.1/esp-idf/components/partition_table/check_sizes.py --offset 0x8000 partition --type app /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/Reflow-plate/build/partition_table/partition-table.bin /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/Reflow-plate/build/ReflowPlate.bin
|
||||
ReflowPlate.bin binary size 0x75900 bytes. Smallest app partition is 0x100000 bytes. 0x8a700 bytes (54%) free.
|
||||
[2/5] Performing build step for 'bootloader'
|
||||
[1/1] cd "/home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/Reflow-plate/build/bootloader" && /home/ricardo/.espressif/tools/python/v6.1/venv/bin/python /home/ricardo/.espressif/v6.1/esp-idf/components/partition_table/check_sizes.py --offset 0x8000 bootloader 0x1000 /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/Reflow-plate/build/bootloader/bootloader.bin
|
||||
Bootloader binary size 0x6640 bytes. 0x9c0 bytes (9%) free.
|
||||
[3/5] No install step for 'bootloader'
|
||||
[4/5] Completed 'bootloader'
|
||||
[4/5] Running utility command for flash
|
||||
esptool --chip esp32 -p /dev/ttyUSB0 -b 460800 --before=default-reset --after=hard-reset write-flash --flash-mode dio --flash-freq 40m --flash-size 2MB 0x1000 bootloader/bootloader.bin 0x8000 partition_table/partition-table.bin 0x10000 ReflowPlate.bin --diff-with bootloader/bootloader_flashed.bin partition_table/partition-table_flashed.bin ReflowPlate_flashed.bin
|
||||
esptool v5.4.0
|
||||
Serial port /dev/ttyUSB0:
|
||||
Connecting....
|
||||
[1A[2K[1A[2KConnected to ESP32 on /dev/ttyUSB0:
|
||||
Chip type: ESP32-D0WD-V3 (revision v3.1)
|
||||
Features: Wi-Fi, BT, Dual Core + LP Core, 240MHz, Vref calibration in eFuse, Coding Scheme None
|
||||
Crystal frequency: 40MHz
|
||||
MAC: 6c:c8:40:46:0c:d4
|
||||
|
||||
Uploading stub flasher...
|
||||
Running stub flasher...
|
||||
[1A[2K[1A[2KStub flasher running.
|
||||
Changing baud rate to 460800...
|
||||
Changed.
|
||||
|
||||
Configuring flash size...
|
||||
|
||||
Writing 'bootloader/bootloader.bin' at 0x00001000...
|
||||
SHA digest in image updated.
|
||||
SHA digest in image updated.
|
||||
No changed sectors found, verifying if data is in flash...
|
||||
[1A[2K'bootloader/bootloader.bin' at 0x00001000 verified.
|
||||
|
||||
Writing 'partition_table/partition-table.bin' at 0x00008000...
|
||||
No changed sectors found, verifying if data is in flash...
|
||||
[1A[2K'partition_table/partition-table.bin' at 0x00008000 verified.
|
||||
|
||||
Writing 'ReflowPlate.bin' at 0x00010000...
|
||||
Changed data sectors found, fast reflashing...
|
||||
Reflashing 1 changed sector at 0x00010000...
|
||||
Flash will be erased from 0x00010000 to 0x00010fff...
|
||||
Compressed 4096 bytes to 1891...
|
||||
|
||||
[2KWriting at 0x00011000 [38;2;114;156;31m━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━[0m 100.0% 1.85kB/1.85kB [0s]
|
||||
[1A[2K[1A[2KWrote 4096 bytes (1891 compressed) at 0x00010000 in 0.0 seconds (691.0 kbit/s).
|
||||
Reflashing 1 changed sector at 0x0001a000...
|
||||
Flash will be erased from 0x0001a000 to 0x0001afff...
|
||||
Compressed 4096 bytes to 1584...
|
||||
|
||||
[2KWriting at 0x0001b000 [38;2;114;156;31m━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━[0m 100.0% 1.55kB/1.55kB [0s]
|
||||
[1A[2K[1A[2KWrote 4096 bytes (1584 compressed) at 0x0001a000 in 0.0 seconds (775.4 kbit/s).
|
||||
Reflashing 4 changed sectors at 0x0001d000...
|
||||
Flash will be erased from 0x0001d000 to 0x00020fff...
|
||||
Compressed 16384 bytes to 7628...
|
||||
|
||||
[2KWriting at 0x00021000 [38;2;114;156;31m━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━[0m 100.0% 7.45kB/7.45kB [0s]
|
||||
[1A[2K[1A[2KWrote 16384 bytes (7628 compressed) at 0x0001d000 in 0.2 seconds (659.5 kbit/s).
|
||||
Reflashing 1 changed sector at 0x00023000...
|
||||
Flash will be erased from 0x00023000 to 0x00023fff...
|
||||
Compressed 4096 bytes to 2290...
|
||||
|
||||
[2KWriting at 0x00024000 [38;2;114;156;31m━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━[0m 100.0% 2.24kB/2.24kB [0s]
|
||||
[1A[2K[1A[2KWrote 4096 bytes (2290 compressed) at 0x00023000 in 0.1 seconds (501.5 kbit/s).
|
||||
Reflashing 86 changed sectors at 0x00030000...
|
||||
Flash will be erased from 0x00030000 to 0x00085fff...
|
||||
Compressed 352256 bytes to 225695...
|
||||
|
||||
[2KWriting at 0x000355c3 [38;2;249;38;114m━━[0m[38;5;237m╺[0m[38;5;237m━━━━━━━━━━━━━━━━━━━━━━━━━━━[0m 7.3% 16.00kB/220.41kB [0s]
|
||||
19
build/log/idf_py_stdout_output_57448
Normal file
19
build/log/idf_py_stdout_output_57448
Normal file
@@ -0,0 +1,19 @@
|
||||
Command: ninja all
|
||||
[1/9] Performing build step for 'bootloader'
|
||||
[1/1] cd "/home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/Reflow-plate/build/bootloader" && /home/ricardo/.espressif/tools/python/v6.1/venv/bin/python /home/ricardo/.espressif/v6.1/esp-idf/components/partition_table/check_sizes.py --offset 0x8000 bootloader 0x1000 /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/Reflow-plate/build/bootloader/bootloader.bin
|
||||
Bootloader binary size 0x6640 bytes. 0x9c0 bytes (9%) free.
|
||||
[2/9] No install step for 'bootloader'
|
||||
[3/9] Completed 'bootloader'
|
||||
[4/9] Building C object esp-idf/main/CMakeFiles/__idf_main.dir/main.c.obj
|
||||
[5/9] Linking C static library esp-idf/main/libmain.a
|
||||
[6/9] Generating esp-idf/esp_system/ld/sections.ld
|
||||
Skipping linker script generation, section names unchanged
|
||||
[7/9] Linking CXX executable ReflowPlate.elf
|
||||
[8/9] Generating binary image from built executable
|
||||
esptool v5.4.0
|
||||
Creating ESP32 image...
|
||||
Merged 3 ELF sections.
|
||||
Successfully created ESP32 image.
|
||||
Generated /home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/Reflow-plate/build/ReflowPlate.bin
|
||||
[9/9] cd "/home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/Reflow-plate/build" && /home/ricardo/.espressif/tools/python/v6.1/venv/bin/python /home/ricardo/.espressif/v6.1/esp-idf/components/partition_table/check_sizes.py --offset 0x8000 partition --type app /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/Reflow-plate/build/partition_table/partition-table.bin /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/Reflow-plate/build/ReflowPlate.bin
|
||||
ReflowPlate.bin binary size 0x75910 bytes. Smallest app partition is 0x100000 bytes. 0x8a6f0 bytes (54%) free.
|
||||
8
build/log/idf_py_stdout_output_57601
Normal file
8
build/log/idf_py_stdout_output_57601
Normal file
@@ -0,0 +1,8 @@
|
||||
Command: ninja all
|
||||
[1/4] cd "/home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/Reflow-plate/build" && /home/ricardo/.espressif/tools/python/v6.1/venv/bin/python /home/ricardo/.espressif/v6.1/esp-idf/components/partition_table/check_sizes.py --offset 0x8000 partition --type app /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/Reflow-plate/build/partition_table/partition-table.bin /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/Reflow-plate/build/ReflowPlate.bin
|
||||
ReflowPlate.bin binary size 0x75910 bytes. Smallest app partition is 0x100000 bytes. 0x8a6f0 bytes (54%) free.
|
||||
[2/4] Performing build step for 'bootloader'
|
||||
[1/1] cd "/home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/Reflow-plate/build/bootloader" && /home/ricardo/.espressif/tools/python/v6.1/venv/bin/python /home/ricardo/.espressif/v6.1/esp-idf/components/partition_table/check_sizes.py --offset 0x8000 bootloader 0x1000 /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/Reflow-plate/build/bootloader/bootloader.bin
|
||||
Bootloader binary size 0x6640 bytes. 0x9c0 bytes (9%) free.
|
||||
[3/4] No install step for 'bootloader'
|
||||
[4/4] Completed 'bootloader'
|
||||
68
build/log/idf_py_stdout_output_57611
Normal file
68
build/log/idf_py_stdout_output_57611
Normal file
@@ -0,0 +1,68 @@
|
||||
Command: ninja flash
|
||||
[1/5] cd "/home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/Reflow-plate/build" && /home/ricardo/.espressif/tools/python/v6.1/venv/bin/python /home/ricardo/.espressif/v6.1/esp-idf/components/partition_table/check_sizes.py --offset 0x8000 partition --type app /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/Reflow-plate/build/partition_table/partition-table.bin /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/Reflow-plate/build/ReflowPlate.bin
|
||||
ReflowPlate.bin binary size 0x75910 bytes. Smallest app partition is 0x100000 bytes. 0x8a6f0 bytes (54%) free.
|
||||
[2/5] Performing build step for 'bootloader'
|
||||
[1/1] cd "/home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/Reflow-plate/build/bootloader" && /home/ricardo/.espressif/tools/python/v6.1/venv/bin/python /home/ricardo/.espressif/v6.1/esp-idf/components/partition_table/check_sizes.py --offset 0x8000 bootloader 0x1000 /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/Reflow-plate/build/bootloader/bootloader.bin
|
||||
Bootloader binary size 0x6640 bytes. 0x9c0 bytes (9%) free.
|
||||
[3/5] No install step for 'bootloader'
|
||||
[4/5] Completed 'bootloader'
|
||||
[4/5] Running utility command for flash
|
||||
esptool --chip esp32 -p /dev/ttyUSB0 -b 460800 --before=default-reset --after=hard-reset write-flash --flash-mode dio --flash-freq 40m --flash-size 2MB 0x1000 bootloader/bootloader.bin 0x8000 partition_table/partition-table.bin 0x10000 ReflowPlate.bin --diff-with bootloader/bootloader_flashed.bin partition_table/partition-table_flashed.bin ReflowPlate_flashed.bin
|
||||
esptool v5.4.0
|
||||
Serial port /dev/ttyUSB0:
|
||||
Connecting....
|
||||
[1A[2K[1A[2KConnected to ESP32 on /dev/ttyUSB0:
|
||||
Chip type: ESP32-D0WD-V3 (revision v3.1)
|
||||
Features: Wi-Fi, BT, Dual Core + LP Core, 240MHz, Vref calibration in eFuse, Coding Scheme None
|
||||
Crystal frequency: 40MHz
|
||||
MAC: 6c:c8:40:46:0c:d4
|
||||
|
||||
Uploading stub flasher...
|
||||
Running stub flasher...
|
||||
[1A[2K[1A[2KStub flasher running.
|
||||
Changing baud rate to 460800...
|
||||
Changed.
|
||||
|
||||
Configuring flash size...
|
||||
|
||||
Writing 'bootloader/bootloader.bin' at 0x00001000...
|
||||
SHA digest in image updated.
|
||||
SHA digest in image updated.
|
||||
No changed sectors found, verifying if data is in flash...
|
||||
[1A[2K'bootloader/bootloader.bin' at 0x00001000 verified.
|
||||
|
||||
Writing 'partition_table/partition-table.bin' at 0x00008000...
|
||||
No changed sectors found, verifying if data is in flash...
|
||||
[1A[2K'partition_table/partition-table.bin' at 0x00008000 verified.
|
||||
|
||||
Writing 'ReflowPlate.bin' at 0x00010000...
|
||||
Changed data sectors found, fast reflashing...
|
||||
Reflashing 1 changed sector at 0x00010000...
|
||||
Flash will be erased from 0x00010000 to 0x00010fff...
|
||||
Compressed 4096 bytes to 1887...
|
||||
|
||||
[2KWriting at 0x00011000 [38;2;114;156;31m━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━[0m 100.0% 1.84kB/1.84kB [0s]
|
||||
[1A[2K[1A[2KWrote 4096 bytes (1887 compressed) at 0x00010000 in 0.0 seconds (687.2 kbit/s).
|
||||
Reflashing 1 changed sector at 0x0001a000...
|
||||
Flash will be erased from 0x0001a000 to 0x0001afff...
|
||||
Compressed 4096 bytes to 1586...
|
||||
|
||||
[2KWriting at 0x0001b000 [38;2;114;156;31m━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━[0m 100.0% 1.55kB/1.55kB [0s]
|
||||
[1A[2K[1A[2KWrote 4096 bytes (1586 compressed) at 0x0001a000 in 0.0 seconds (727.6 kbit/s).
|
||||
Reflashing 4 changed sectors at 0x0001d000...
|
||||
Flash will be erased from 0x0001d000 to 0x00020fff...
|
||||
Compressed 16384 bytes to 7628...
|
||||
|
||||
[2KWriting at 0x00021000 [38;2;114;156;31m━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━[0m 100.0% 7.45kB/7.45kB [0s]
|
||||
[1A[2K[1A[2KWrote 16384 bytes (7628 compressed) at 0x0001d000 in 0.2 seconds (651.8 kbit/s).
|
||||
Reflashing 1 changed sector at 0x00023000...
|
||||
Flash will be erased from 0x00023000 to 0x00023fff...
|
||||
Compressed 4096 bytes to 2291...
|
||||
|
||||
[2KWriting at 0x00024000 [38;2;114;156;31m━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━[0m 100.0% 2.24kB/2.24kB [0s]
|
||||
[1A[2K[1A[2KWrote 4096 bytes (2291 compressed) at 0x00023000 in 0.1 seconds (495.2 kbit/s).
|
||||
Reflashing 86 changed sectors at 0x00030000...
|
||||
Flash will be erased from 0x00030000 to 0x00085fff...
|
||||
Compressed 352256 bytes to 225678...
|
||||
|
||||
[2KWriting at 0x000355d1 [38;2;249;38;114m━━[0m[38;5;237m╺[0m[38;5;237m━━━━━━━━━━━━━━━━━━━━━━━━━━━[0m 7.3% 16.00kB/220.39kB [0s]
|
||||
19
build/log/idf_py_stdout_output_57671
Normal file
19
build/log/idf_py_stdout_output_57671
Normal file
@@ -0,0 +1,19 @@
|
||||
Command: ninja all
|
||||
[1/9] Performing build step for 'bootloader'
|
||||
[1/1] cd "/home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/Reflow-plate/build/bootloader" && /home/ricardo/.espressif/tools/python/v6.1/venv/bin/python /home/ricardo/.espressif/v6.1/esp-idf/components/partition_table/check_sizes.py --offset 0x8000 bootloader 0x1000 /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/Reflow-plate/build/bootloader/bootloader.bin
|
||||
Bootloader binary size 0x6640 bytes. 0x9c0 bytes (9%) free.
|
||||
[2/9] No install step for 'bootloader'
|
||||
[3/9] Completed 'bootloader'
|
||||
[4/9] Building C object esp-idf/main/CMakeFiles/__idf_main.dir/main.c.obj
|
||||
[5/9] Linking C static library esp-idf/main/libmain.a
|
||||
[6/9] Generating esp-idf/esp_system/ld/sections.ld
|
||||
Skipping linker script generation, section names unchanged
|
||||
[7/9] Linking CXX executable ReflowPlate.elf
|
||||
[8/9] Generating binary image from built executable
|
||||
esptool v5.4.0
|
||||
Creating ESP32 image...
|
||||
Merged 3 ELF sections.
|
||||
Successfully created ESP32 image.
|
||||
Generated /home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/Reflow-plate/build/ReflowPlate.bin
|
||||
[9/9] cd "/home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/Reflow-plate/build" && /home/ricardo/.espressif/tools/python/v6.1/venv/bin/python /home/ricardo/.espressif/v6.1/esp-idf/components/partition_table/check_sizes.py --offset 0x8000 partition --type app /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/Reflow-plate/build/partition_table/partition-table.bin /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/Reflow-plate/build/ReflowPlate.bin
|
||||
ReflowPlate.bin binary size 0x75920 bytes. Smallest app partition is 0x100000 bytes. 0x8a6e0 bytes (54%) free.
|
||||
8
build/log/idf_py_stdout_output_57824
Normal file
8
build/log/idf_py_stdout_output_57824
Normal file
@@ -0,0 +1,8 @@
|
||||
Command: ninja all
|
||||
[1/4] cd "/home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/Reflow-plate/build" && /home/ricardo/.espressif/tools/python/v6.1/venv/bin/python /home/ricardo/.espressif/v6.1/esp-idf/components/partition_table/check_sizes.py --offset 0x8000 partition --type app /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/Reflow-plate/build/partition_table/partition-table.bin /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/Reflow-plate/build/ReflowPlate.bin
|
||||
ReflowPlate.bin binary size 0x75920 bytes. Smallest app partition is 0x100000 bytes. 0x8a6e0 bytes (54%) free.
|
||||
[2/4] Performing build step for 'bootloader'
|
||||
[1/1] cd "/home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/Reflow-plate/build/bootloader" && /home/ricardo/.espressif/tools/python/v6.1/venv/bin/python /home/ricardo/.espressif/v6.1/esp-idf/components/partition_table/check_sizes.py --offset 0x8000 bootloader 0x1000 /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/Reflow-plate/build/bootloader/bootloader.bin
|
||||
Bootloader binary size 0x6640 bytes. 0x9c0 bytes (9%) free.
|
||||
[3/4] No install step for 'bootloader'
|
||||
[4/4] Completed 'bootloader'
|
||||
68
build/log/idf_py_stdout_output_57834
Normal file
68
build/log/idf_py_stdout_output_57834
Normal file
@@ -0,0 +1,68 @@
|
||||
Command: ninja flash
|
||||
[1/5] cd "/home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/Reflow-plate/build" && /home/ricardo/.espressif/tools/python/v6.1/venv/bin/python /home/ricardo/.espressif/v6.1/esp-idf/components/partition_table/check_sizes.py --offset 0x8000 partition --type app /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/Reflow-plate/build/partition_table/partition-table.bin /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/Reflow-plate/build/ReflowPlate.bin
|
||||
ReflowPlate.bin binary size 0x75920 bytes. Smallest app partition is 0x100000 bytes. 0x8a6e0 bytes (54%) free.
|
||||
[2/5] Performing build step for 'bootloader'
|
||||
[1/1] cd "/home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/Reflow-plate/build/bootloader" && /home/ricardo/.espressif/tools/python/v6.1/venv/bin/python /home/ricardo/.espressif/v6.1/esp-idf/components/partition_table/check_sizes.py --offset 0x8000 bootloader 0x1000 /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/Reflow-plate/build/bootloader/bootloader.bin
|
||||
Bootloader binary size 0x6640 bytes. 0x9c0 bytes (9%) free.
|
||||
[3/5] No install step for 'bootloader'
|
||||
[4/5] Completed 'bootloader'
|
||||
[4/5] Running utility command for flash
|
||||
esptool --chip esp32 -p /dev/ttyUSB0 -b 460800 --before=default-reset --after=hard-reset write-flash --flash-mode dio --flash-freq 40m --flash-size 2MB 0x1000 bootloader/bootloader.bin 0x8000 partition_table/partition-table.bin 0x10000 ReflowPlate.bin --diff-with bootloader/bootloader_flashed.bin partition_table/partition-table_flashed.bin ReflowPlate_flashed.bin
|
||||
esptool v5.4.0
|
||||
Serial port /dev/ttyUSB0:
|
||||
Connecting.....
|
||||
[1A[2K[1A[2KConnected to ESP32 on /dev/ttyUSB0:
|
||||
Chip type: ESP32-D0WD-V3 (revision v3.1)
|
||||
Features: Wi-Fi, BT, Dual Core + LP Core, 240MHz, Vref calibration in eFuse, Coding Scheme None
|
||||
Crystal frequency: 40MHz
|
||||
MAC: 6c:c8:40:46:0c:d4
|
||||
|
||||
Uploading stub flasher...
|
||||
Running stub flasher...
|
||||
[1A[2K[1A[2KStub flasher running.
|
||||
Changing baud rate to 460800...
|
||||
Changed.
|
||||
|
||||
Configuring flash size...
|
||||
|
||||
Writing 'bootloader/bootloader.bin' at 0x00001000...
|
||||
SHA digest in image updated.
|
||||
SHA digest in image updated.
|
||||
No changed sectors found, verifying if data is in flash...
|
||||
[1A[2K'bootloader/bootloader.bin' at 0x00001000 verified.
|
||||
|
||||
Writing 'partition_table/partition-table.bin' at 0x00008000...
|
||||
No changed sectors found, verifying if data is in flash...
|
||||
[1A[2K'partition_table/partition-table.bin' at 0x00008000 verified.
|
||||
|
||||
Writing 'ReflowPlate.bin' at 0x00010000...
|
||||
Changed data sectors found, fast reflashing...
|
||||
Reflashing 1 changed sector at 0x00010000...
|
||||
Flash will be erased from 0x00010000 to 0x00010fff...
|
||||
Compressed 4096 bytes to 1884...
|
||||
|
||||
[2KWriting at 0x00011000 [38;2;114;156;31m━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━[0m 100.0% 1.84kB/1.84kB [0s]
|
||||
[1A[2K[1A[2KWrote 4096 bytes (1884 compressed) at 0x00010000 in 0.0 seconds (688.1 kbit/s).
|
||||
Reflashing 1 changed sector at 0x0001a000...
|
||||
Flash will be erased from 0x0001a000 to 0x0001afff...
|
||||
Compressed 4096 bytes to 1584...
|
||||
|
||||
[2KWriting at 0x0001b000 [38;2;114;156;31m━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━[0m 100.0% 1.55kB/1.55kB [0s]
|
||||
[1A[2K[1A[2KWrote 4096 bytes (1584 compressed) at 0x0001a000 in 0.0 seconds (740.7 kbit/s).
|
||||
Reflashing 4 changed sectors at 0x0001d000...
|
||||
Flash will be erased from 0x0001d000 to 0x00020fff...
|
||||
Compressed 16384 bytes to 7635...
|
||||
|
||||
[2KWriting at 0x00021000 [38;2;114;156;31m━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━[0m 100.0% 7.46kB/7.46kB [0s]
|
||||
[1A[2K[1A[2KWrote 16384 bytes (7635 compressed) at 0x0001d000 in 0.2 seconds (660.3 kbit/s).
|
||||
Reflashing 1 changed sector at 0x00023000...
|
||||
Flash will be erased from 0x00023000 to 0x00023fff...
|
||||
Compressed 4096 bytes to 2287...
|
||||
|
||||
[2KWriting at 0x00024000 [38;2;114;156;31m━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━[0m 100.0% 2.23kB/2.23kB [0s]
|
||||
[1A[2K[1A[2KWrote 4096 bytes (2287 compressed) at 0x00023000 in 0.1 seconds (486.4 kbit/s).
|
||||
Reflashing 86 changed sectors at 0x00030000...
|
||||
Flash will be erased from 0x00030000 to 0x00085fff...
|
||||
Compressed 352256 bytes to 225694...
|
||||
|
||||
[2KWriting at 0x000355d2 [38;2;249;38;114m━━[0m[38;5;237m╺[0m[38;5;237m━━━━━━━━━━━━━━━━━━━━━━━━━━━[0m 7.3% 16.00kB/220.40kB [0s]
|
||||
19
build/log/idf_py_stdout_output_57885
Normal file
19
build/log/idf_py_stdout_output_57885
Normal file
@@ -0,0 +1,19 @@
|
||||
Command: ninja all
|
||||
[1/9] Performing build step for 'bootloader'
|
||||
[1/1] cd "/home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/Reflow-plate/build/bootloader" && /home/ricardo/.espressif/tools/python/v6.1/venv/bin/python /home/ricardo/.espressif/v6.1/esp-idf/components/partition_table/check_sizes.py --offset 0x8000 bootloader 0x1000 /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/Reflow-plate/build/bootloader/bootloader.bin
|
||||
Bootloader binary size 0x6640 bytes. 0x9c0 bytes (9%) free.
|
||||
[2/9] No install step for 'bootloader'
|
||||
[3/9] Completed 'bootloader'
|
||||
[4/9] Building C object esp-idf/main/CMakeFiles/__idf_main.dir/main.c.obj
|
||||
[5/9] Linking C static library esp-idf/main/libmain.a
|
||||
[6/9] Generating esp-idf/esp_system/ld/sections.ld
|
||||
Skipping linker script generation, section names unchanged
|
||||
[7/9] Linking CXX executable ReflowPlate.elf
|
||||
[8/9] Generating binary image from built executable
|
||||
esptool v5.4.0
|
||||
Creating ESP32 image...
|
||||
Merged 3 ELF sections.
|
||||
Successfully created ESP32 image.
|
||||
Generated /home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/Reflow-plate/build/ReflowPlate.bin
|
||||
[9/9] cd "/home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/Reflow-plate/build" && /home/ricardo/.espressif/tools/python/v6.1/venv/bin/python /home/ricardo/.espressif/v6.1/esp-idf/components/partition_table/check_sizes.py --offset 0x8000 partition --type app /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/Reflow-plate/build/partition_table/partition-table.bin /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/Reflow-plate/build/ReflowPlate.bin
|
||||
ReflowPlate.bin binary size 0x75910 bytes. Smallest app partition is 0x100000 bytes. 0x8a6f0 bytes (54%) free.
|
||||
8
build/log/idf_py_stdout_output_58038
Normal file
8
build/log/idf_py_stdout_output_58038
Normal file
@@ -0,0 +1,8 @@
|
||||
Command: ninja all
|
||||
[1/4] cd "/home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/Reflow-plate/build" && /home/ricardo/.espressif/tools/python/v6.1/venv/bin/python /home/ricardo/.espressif/v6.1/esp-idf/components/partition_table/check_sizes.py --offset 0x8000 partition --type app /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/Reflow-plate/build/partition_table/partition-table.bin /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/Reflow-plate/build/ReflowPlate.bin
|
||||
ReflowPlate.bin binary size 0x75910 bytes. Smallest app partition is 0x100000 bytes. 0x8a6f0 bytes (54%) free.
|
||||
[2/4] Performing build step for 'bootloader'
|
||||
[1/1] cd "/home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/Reflow-plate/build/bootloader" && /home/ricardo/.espressif/tools/python/v6.1/venv/bin/python /home/ricardo/.espressif/v6.1/esp-idf/components/partition_table/check_sizes.py --offset 0x8000 bootloader 0x1000 /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/Reflow-plate/build/bootloader/bootloader.bin
|
||||
Bootloader binary size 0x6640 bytes. 0x9c0 bytes (9%) free.
|
||||
[3/4] No install step for 'bootloader'
|
||||
[4/4] Completed 'bootloader'
|
||||
68
build/log/idf_py_stdout_output_58048
Normal file
68
build/log/idf_py_stdout_output_58048
Normal file
@@ -0,0 +1,68 @@
|
||||
Command: ninja flash
|
||||
[1/5] cd "/home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/Reflow-plate/build" && /home/ricardo/.espressif/tools/python/v6.1/venv/bin/python /home/ricardo/.espressif/v6.1/esp-idf/components/partition_table/check_sizes.py --offset 0x8000 partition --type app /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/Reflow-plate/build/partition_table/partition-table.bin /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/Reflow-plate/build/ReflowPlate.bin
|
||||
ReflowPlate.bin binary size 0x75910 bytes. Smallest app partition is 0x100000 bytes. 0x8a6f0 bytes (54%) free.
|
||||
[2/5] Performing build step for 'bootloader'
|
||||
[1/1] cd "/home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/Reflow-plate/build/bootloader" && /home/ricardo/.espressif/tools/python/v6.1/venv/bin/python /home/ricardo/.espressif/v6.1/esp-idf/components/partition_table/check_sizes.py --offset 0x8000 bootloader 0x1000 /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/Reflow-plate/build/bootloader/bootloader.bin
|
||||
Bootloader binary size 0x6640 bytes. 0x9c0 bytes (9%) free.
|
||||
[3/5] No install step for 'bootloader'
|
||||
[4/5] Completed 'bootloader'
|
||||
[4/5] Running utility command for flash
|
||||
esptool --chip esp32 -p /dev/ttyUSB0 -b 460800 --before=default-reset --after=hard-reset write-flash --flash-mode dio --flash-freq 40m --flash-size 2MB 0x1000 bootloader/bootloader.bin 0x8000 partition_table/partition-table.bin 0x10000 ReflowPlate.bin --diff-with bootloader/bootloader_flashed.bin partition_table/partition-table_flashed.bin ReflowPlate_flashed.bin
|
||||
esptool v5.4.0
|
||||
Serial port /dev/ttyUSB0:
|
||||
Connecting....
|
||||
[1A[2K[1A[2KConnected to ESP32 on /dev/ttyUSB0:
|
||||
Chip type: ESP32-D0WD-V3 (revision v3.1)
|
||||
Features: Wi-Fi, BT, Dual Core + LP Core, 240MHz, Vref calibration in eFuse, Coding Scheme None
|
||||
Crystal frequency: 40MHz
|
||||
MAC: 6c:c8:40:46:0c:d4
|
||||
|
||||
Uploading stub flasher...
|
||||
Running stub flasher...
|
||||
[1A[2K[1A[2KStub flasher running.
|
||||
Changing baud rate to 460800...
|
||||
Changed.
|
||||
|
||||
Configuring flash size...
|
||||
|
||||
Writing 'bootloader/bootloader.bin' at 0x00001000...
|
||||
SHA digest in image updated.
|
||||
SHA digest in image updated.
|
||||
No changed sectors found, verifying if data is in flash...
|
||||
[1A[2K'bootloader/bootloader.bin' at 0x00001000 verified.
|
||||
|
||||
Writing 'partition_table/partition-table.bin' at 0x00008000...
|
||||
No changed sectors found, verifying if data is in flash...
|
||||
[1A[2K'partition_table/partition-table.bin' at 0x00008000 verified.
|
||||
|
||||
Writing 'ReflowPlate.bin' at 0x00010000...
|
||||
Changed data sectors found, fast reflashing...
|
||||
Reflashing 1 changed sector at 0x00010000...
|
||||
Flash will be erased from 0x00010000 to 0x00010fff...
|
||||
Compressed 4096 bytes to 1887...
|
||||
|
||||
[2KWriting at 0x00011000 [38;2;114;156;31m━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━[0m 100.0% 1.84kB/1.84kB [0s]
|
||||
[1A[2K[1A[2KWrote 4096 bytes (1887 compressed) at 0x00010000 in 0.0 seconds (694.1 kbit/s).
|
||||
Reflashing 1 changed sector at 0x0001a000...
|
||||
Flash will be erased from 0x0001a000 to 0x0001afff...
|
||||
Compressed 4096 bytes to 1586...
|
||||
|
||||
[2KWriting at 0x0001b000 [38;2;114;156;31m━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━[0m 100.0% 1.55kB/1.55kB [0s]
|
||||
[1A[2K[1A[2KWrote 4096 bytes (1586 compressed) at 0x0001a000 in 0.0 seconds (761.4 kbit/s).
|
||||
Reflashing 4 changed sectors at 0x0001d000...
|
||||
Flash will be erased from 0x0001d000 to 0x00020fff...
|
||||
Compressed 16384 bytes to 7628...
|
||||
|
||||
[2KWriting at 0x00021000 [38;2;114;156;31m━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━[0m 100.0% 7.45kB/7.45kB [0s]
|
||||
[1A[2K[1A[2KWrote 16384 bytes (7628 compressed) at 0x0001d000 in 0.2 seconds (653.1 kbit/s).
|
||||
Reflashing 1 changed sector at 0x00023000...
|
||||
Flash will be erased from 0x00023000 to 0x00023fff...
|
||||
Compressed 4096 bytes to 2290...
|
||||
|
||||
[2KWriting at 0x00024000 [38;2;114;156;31m━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━[0m 100.0% 2.24kB/2.24kB [0s]
|
||||
[1A[2K[1A[2KWrote 4096 bytes (2290 compressed) at 0x00023000 in 0.1 seconds (527.1 kbit/s).
|
||||
Reflashing 86 changed sectors at 0x00030000...
|
||||
Flash will be erased from 0x00030000 to 0x00085fff...
|
||||
Compressed 352256 bytes to 225715...
|
||||
|
||||
[2KWriting at 0x000355c0 [38;2;249;38;114m━━[0m[38;5;237m╺[0m[38;5;237m━━━━━━━━━━━━━━━━━━━━━━━━━━━[0m 7.3% 16.00kB/220.42kB [0s]
|
||||
19
build/log/idf_py_stdout_output_58148
Normal file
19
build/log/idf_py_stdout_output_58148
Normal file
@@ -0,0 +1,19 @@
|
||||
Command: ninja all
|
||||
[1/9] Performing build step for 'bootloader'
|
||||
[1/1] cd "/home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/Reflow-plate/build/bootloader" && /home/ricardo/.espressif/tools/python/v6.1/venv/bin/python /home/ricardo/.espressif/v6.1/esp-idf/components/partition_table/check_sizes.py --offset 0x8000 bootloader 0x1000 /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/Reflow-plate/build/bootloader/bootloader.bin
|
||||
Bootloader binary size 0x6640 bytes. 0x9c0 bytes (9%) free.
|
||||
[2/9] No install step for 'bootloader'
|
||||
[3/9] Completed 'bootloader'
|
||||
[4/9] Building C object esp-idf/main/CMakeFiles/__idf_main.dir/main.c.obj
|
||||
[5/9] Linking C static library esp-idf/main/libmain.a
|
||||
[6/9] Generating esp-idf/esp_system/ld/sections.ld
|
||||
Skipping linker script generation, section names unchanged
|
||||
[7/9] Linking CXX executable ReflowPlate.elf
|
||||
[8/9] Generating binary image from built executable
|
||||
esptool v5.4.0
|
||||
Creating ESP32 image...
|
||||
Merged 3 ELF sections.
|
||||
Successfully created ESP32 image.
|
||||
Generated /home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/Reflow-plate/build/ReflowPlate.bin
|
||||
[9/9] cd "/home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/Reflow-plate/build" && /home/ricardo/.espressif/tools/python/v6.1/venv/bin/python /home/ricardo/.espressif/v6.1/esp-idf/components/partition_table/check_sizes.py --offset 0x8000 partition --type app /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/Reflow-plate/build/partition_table/partition-table.bin /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/Reflow-plate/build/ReflowPlate.bin
|
||||
ReflowPlate.bin binary size 0x75920 bytes. Smallest app partition is 0x100000 bytes. 0x8a6e0 bytes (54%) free.
|
||||
19
build/log/idf_py_stdout_output_58319
Normal file
19
build/log/idf_py_stdout_output_58319
Normal file
@@ -0,0 +1,19 @@
|
||||
Command: ninja all
|
||||
[1/9] Performing build step for 'bootloader'
|
||||
[1/1] cd "/home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/Reflow-plate/build/bootloader" && /home/ricardo/.espressif/tools/python/v6.1/venv/bin/python /home/ricardo/.espressif/v6.1/esp-idf/components/partition_table/check_sizes.py --offset 0x8000 bootloader 0x1000 /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/Reflow-plate/build/bootloader/bootloader.bin
|
||||
Bootloader binary size 0x6640 bytes. 0x9c0 bytes (9%) free.
|
||||
[2/9] No install step for 'bootloader'
|
||||
[3/9] Completed 'bootloader'
|
||||
[4/9] Building C object esp-idf/main/CMakeFiles/__idf_main.dir/main.c.obj
|
||||
[5/9] Linking C static library esp-idf/main/libmain.a
|
||||
[6/9] Generating esp-idf/esp_system/ld/sections.ld
|
||||
Skipping linker script generation, section names unchanged
|
||||
[7/9] Linking CXX executable ReflowPlate.elf
|
||||
[8/9] Generating binary image from built executable
|
||||
esptool v5.4.0
|
||||
Creating ESP32 image...
|
||||
Merged 3 ELF sections.
|
||||
Successfully created ESP32 image.
|
||||
Generated /home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/Reflow-plate/build/ReflowPlate.bin
|
||||
[9/9] cd "/home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/Reflow-plate/build" && /home/ricardo/.espressif/tools/python/v6.1/venv/bin/python /home/ricardo/.espressif/v6.1/esp-idf/components/partition_table/check_sizes.py --offset 0x8000 partition --type app /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/Reflow-plate/build/partition_table/partition-table.bin /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/Reflow-plate/build/ReflowPlate.bin
|
||||
ReflowPlate.bin binary size 0x75920 bytes. Smallest app partition is 0x100000 bytes. 0x8a6e0 bytes (54%) free.
|
||||
8
build/log/idf_py_stdout_output_58472
Normal file
8
build/log/idf_py_stdout_output_58472
Normal file
@@ -0,0 +1,8 @@
|
||||
Command: ninja all
|
||||
[1/4] cd "/home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/Reflow-plate/build" && /home/ricardo/.espressif/tools/python/v6.1/venv/bin/python /home/ricardo/.espressif/v6.1/esp-idf/components/partition_table/check_sizes.py --offset 0x8000 partition --type app /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/Reflow-plate/build/partition_table/partition-table.bin /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/Reflow-plate/build/ReflowPlate.bin
|
||||
ReflowPlate.bin binary size 0x75920 bytes. Smallest app partition is 0x100000 bytes. 0x8a6e0 bytes (54%) free.
|
||||
[2/4] Performing build step for 'bootloader'
|
||||
[1/1] cd "/home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/Reflow-plate/build/bootloader" && /home/ricardo/.espressif/tools/python/v6.1/venv/bin/python /home/ricardo/.espressif/v6.1/esp-idf/components/partition_table/check_sizes.py --offset 0x8000 bootloader 0x1000 /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/Reflow-plate/build/bootloader/bootloader.bin
|
||||
Bootloader binary size 0x6640 bytes. 0x9c0 bytes (9%) free.
|
||||
[3/4] No install step for 'bootloader'
|
||||
[4/4] Completed 'bootloader'
|
||||
68
build/log/idf_py_stdout_output_58482
Normal file
68
build/log/idf_py_stdout_output_58482
Normal file
@@ -0,0 +1,68 @@
|
||||
Command: ninja flash
|
||||
[1/5] cd "/home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/Reflow-plate/build" && /home/ricardo/.espressif/tools/python/v6.1/venv/bin/python /home/ricardo/.espressif/v6.1/esp-idf/components/partition_table/check_sizes.py --offset 0x8000 partition --type app /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/Reflow-plate/build/partition_table/partition-table.bin /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/Reflow-plate/build/ReflowPlate.bin
|
||||
ReflowPlate.bin binary size 0x75920 bytes. Smallest app partition is 0x100000 bytes. 0x8a6e0 bytes (54%) free.
|
||||
[2/5] Performing build step for 'bootloader'
|
||||
[1/1] cd "/home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/Reflow-plate/build/bootloader" && /home/ricardo/.espressif/tools/python/v6.1/venv/bin/python /home/ricardo/.espressif/v6.1/esp-idf/components/partition_table/check_sizes.py --offset 0x8000 bootloader 0x1000 /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/Reflow-plate/build/bootloader/bootloader.bin
|
||||
Bootloader binary size 0x6640 bytes. 0x9c0 bytes (9%) free.
|
||||
[3/5] No install step for 'bootloader'
|
||||
[4/5] Completed 'bootloader'
|
||||
[4/5] Running utility command for flash
|
||||
esptool --chip esp32 -p /dev/ttyUSB0 -b 460800 --before=default-reset --after=hard-reset write-flash --flash-mode dio --flash-freq 40m --flash-size 2MB 0x1000 bootloader/bootloader.bin 0x8000 partition_table/partition-table.bin 0x10000 ReflowPlate.bin --diff-with bootloader/bootloader_flashed.bin partition_table/partition-table_flashed.bin ReflowPlate_flashed.bin
|
||||
esptool v5.4.0
|
||||
Serial port /dev/ttyUSB0:
|
||||
Connecting....
|
||||
[1A[2K[1A[2KConnected to ESP32 on /dev/ttyUSB0:
|
||||
Chip type: ESP32-D0WD-V3 (revision v3.1)
|
||||
Features: Wi-Fi, BT, Dual Core + LP Core, 240MHz, Vref calibration in eFuse, Coding Scheme None
|
||||
Crystal frequency: 40MHz
|
||||
MAC: 6c:c8:40:46:0c:d4
|
||||
|
||||
Uploading stub flasher...
|
||||
Running stub flasher...
|
||||
[1A[2K[1A[2KStub flasher running.
|
||||
Changing baud rate to 460800...
|
||||
Changed.
|
||||
|
||||
Configuring flash size...
|
||||
|
||||
Writing 'bootloader/bootloader.bin' at 0x00001000...
|
||||
SHA digest in image updated.
|
||||
SHA digest in image updated.
|
||||
No changed sectors found, verifying if data is in flash...
|
||||
[1A[2K'bootloader/bootloader.bin' at 0x00001000 verified.
|
||||
|
||||
Writing 'partition_table/partition-table.bin' at 0x00008000...
|
||||
No changed sectors found, verifying if data is in flash...
|
||||
[1A[2K'partition_table/partition-table.bin' at 0x00008000 verified.
|
||||
|
||||
Writing 'ReflowPlate.bin' at 0x00010000...
|
||||
Changed data sectors found, fast reflashing...
|
||||
Reflashing 1 changed sector at 0x00010000...
|
||||
Flash will be erased from 0x00010000 to 0x00010fff...
|
||||
Compressed 4096 bytes to 1894...
|
||||
|
||||
[2KWriting at 0x00011000 [38;2;114;156;31m━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━[0m 100.0% 1.85kB/1.85kB [0s]
|
||||
[1A[2K[1A[2KWrote 4096 bytes (1894 compressed) at 0x00010000 in 0.0 seconds (681.4 kbit/s).
|
||||
Reflashing 1 changed sector at 0x0001a000...
|
||||
Flash will be erased from 0x0001a000 to 0x0001afff...
|
||||
Compressed 4096 bytes to 1585...
|
||||
|
||||
[2KWriting at 0x0001b000 [38;2;114;156;31m━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━[0m 100.0% 1.55kB/1.55kB [0s]
|
||||
[1A[2K[1A[2KWrote 4096 bytes (1585 compressed) at 0x0001a000 in 0.0 seconds (749.5 kbit/s).
|
||||
Reflashing 4 changed sectors at 0x0001d000...
|
||||
Flash will be erased from 0x0001d000 to 0x00020fff...
|
||||
Compressed 16384 bytes to 7633...
|
||||
|
||||
[2KWriting at 0x00021000 [38;2;114;156;31m━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━[0m 100.0% 7.45kB/7.45kB [0s]
|
||||
[1A[2K[1A[2KWrote 16384 bytes (7633 compressed) at 0x0001d000 in 0.2 seconds (654.1 kbit/s).
|
||||
Reflashing 1 changed sector at 0x00023000...
|
||||
Flash will be erased from 0x00023000 to 0x00023fff...
|
||||
Compressed 4096 bytes to 2291...
|
||||
|
||||
[2KWriting at 0x00024000 [38;2;114;156;31m━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━[0m 100.0% 2.24kB/2.24kB [0s]
|
||||
[1A[2K[1A[2KWrote 4096 bytes (2291 compressed) at 0x00023000 in 0.1 seconds (493.0 kbit/s).
|
||||
Reflashing 86 changed sectors at 0x00030000...
|
||||
Flash will be erased from 0x00030000 to 0x00085fff...
|
||||
Compressed 352256 bytes to 225703...
|
||||
|
||||
[2KWriting at 0x000355cc [38;2;249;38;114m━━[0m[38;5;237m╺[0m[38;5;237m━━━━━━━━━━━━━━━━━━━━━━━━━━━[0m 7.3% 16.00kB/220.41kB [0s]
|
||||
Some files were not shown because too many files have changed in this diff Show More
Reference in New Issue
Block a user