First commit with working display

build/log/idf_py_stdout_output_34230

@@ -0,0 +1,51 @@
+Command: ninja flash
+[1/5] cd "/home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/V0.1/build" && /home/ricardo/.espressif/tools/python/v6.1/venv/bin/python /home/ricardo/.espressif/v6.1/esp-idf/components/partition_table/check_sizes.py --offset 0x8000 partition --type app /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/V0.1/build/partition_table/partition-table.bin /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/V0.1/build/ReflowPlate.bin
+ReflowPlate.bin binary size 0x75bb0 bytes. Smallest app partition is 0x100000 bytes. 0x8a450 bytes (54%) free.
+[2/5] Performing build step for 'bootloader'
+[1/1] cd "/home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/V0.1/build/bootloader" && /home/ricardo/.espressif/tools/python/v6.1/venv/bin/python /home/ricardo/.espressif/v6.1/esp-idf/components/partition_table/check_sizes.py --offset 0x8000 bootloader 0x1000 /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/V0.1/build/bootloader/bootloader.bin
+Bootloader binary size 0x6640 bytes. 0x9c0 bytes (9%) free.
+[3/5] No install step for 'bootloader'
+[4/5] Completed 'bootloader'
+[4/5] Running utility command for flash
+esptool --chip esp32 -p /dev/ttyUSB0 -b 460800 --before=default-reset --after=hard-reset write-flash --flash-mode dio --flash-freq 40m --flash-size 2MB 0x1000 bootloader/bootloader.bin 0x8000 partition_table/partition-table.bin 0x10000 ReflowPlate.bin --skip-flashed
+esptool v5.4.0
+Serial port /dev/ttyUSB0:
+Connecting......
+Connected to ESP32 on /dev/ttyUSB0:
+Chip type:          ESP32-D0WD-V3 (revision v3.1)
+Features:           Wi-Fi, BT, Dual Core + LP Core, 240MHz, Vref calibration in eFuse, Coding Scheme None
+Crystal frequency:  40MHz
+MAC:                6c:c8:40:46:0c:d4
+
+Uploading stub flasher...
+Running stub flasher...
+Stub flasher running.
+Changing baud rate to 460800...
+Changed.
+
+Configuring flash size...
+
+Writing 'bootloader/bootloader.bin' at 0x00001000...
+SHA digest in image updated.
+Comparing flash contents against new data...
+Flash will be erased from 0x00001000 to 0x00007fff...
+Compressed 26176 bytes to 16579...
+
+Writing at 0x00007539 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━╸  98.8% 16.00kB/16.19kB [0s] 
+Writing at 0x00007640 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 100.0% 16.19kB/16.19kB [0s] 
+Wrote 26176 bytes (16579 compressed) at 0x00001000 in 0.7 seconds (282.6 kbit/s).
+Verifying written data...
+Hash of data verified.
+
+Writing 'partition_table/partition-table.bin' at 0x00008000...
+Comparing flash contents against new data...
+'partition_table/partition-table.bin' at 0x00008000 already in flash, skipping write.
+
+Writing 'ReflowPlate.bin' at 0x00010000...
+Comparing flash contents against new data...
+Flash will be erased from 0x00010000 to 0x00085fff...
+Compressed 482224 bytes to 291193...
+
+Writing at 0x0001b927 ━╸━━━━━━━━━━━━━━━━━━━━━━━━━━━━   5.6% 16.00kB/284.37kB [0s] 
+Writing at 0x00024081 ━━━╺━━━━━━━━━━━━━━━━━━━━━━━━━━  11.3% 32.00kB/284.37kB [0s] 
+Writing at 0x00029e97 ━━━━━╺━━━━━━━━━━━━━━━━━━━━━━━━  16.9% 48.00kB/284.37kB [1s]