/*
 * LVGL bring-up for ESP32-2432S028R ("Cheap Yellow Display")
 * ESP-IDF 5.2+ / LVGL 9 / esp_lvgl_port 2.x
 *
 * main/idf_component.yml:
 *   dependencies:
 *     idf: ">=5.2"
 *     espressif/esp_lvgl_port: "^2"
 *     espressif/esp_lcd_ili9341: "^1"
 *     atanisoft/esp_lcd_touch_xpt2046: "^1"
 *
 * main/CMakeLists.txt:
 *   idf_component_register(SRCS "testing.c"
 *                          PRIV_REQUIRES esp_driver_gpio esp_driver_spi esp_lcd
 *                          INCLUDE_DIRS ".")
 */

#include "freertos/FreeRTOS.h"
#include "freertos/task.h"
#include "driver/gpio.h"
#include "driver/spi_master.h"
#include "esp_lcd_panel_io.h"
#include "esp_lcd_panel_ops.h"
#include "esp_lcd_panel_vendor.h"
#include "esp_lcd_touch_xpt2046.h"
#include "esp_lvgl_port.h"
#include "esp_err.h"
#include "esp_log.h"

static const char *TAG = "cyd";

/* ---- Display: ILI9341 on SPI2 (HSPI) ---- */
#define LCD_HOST            SPI2_HOST
#define PIN_LCD_SCLK        14
#define PIN_LCD_MOSI        13
#define PIN_LCD_MISO        12
#define PIN_LCD_CS          15
#define PIN_LCD_DC          2
#define PIN_LCD_RST         -1      /* tied high on this board */
#define PIN_LCD_BL          21      /* active high */

/* ---- Touch: XPT2046 on SPI3 (VSPI) ---- */
#define TOUCH_HOST          SPI3_HOST
#define PIN_TP_SCLK         25
#define PIN_TP_MOSI         32
#define PIN_TP_MISO         39      /* input-only pin, fine for MISO */
#define PIN_TP_CS           33
#define PIN_TP_IRQ          36      /* input-only pin */

#define LCD_H_RES           240
#define LCD_V_RES           320
#define LCD_CMD_BITS        8
#define LCD_PARAM_BITS      8
#define LCD_PIXEL_CLOCK_HZ  (40 * 1000 * 1000)

/* XPT2046 is slow — datasheet max is ~2.5 MHz. Going faster gives
 * garbage coordinates that look like random taps. */
#define TOUCH_CLOCK_HZ      (2 * 1000 * 1000)

/* Partial draw buffer. No PSRAM on this board, so keep it modest:
 * 240 * 40 * 2 bytes = 19.2 KB per buffer, doubled = 38.4 KB. */
#define LVGL_BUF_LINES      40

static esp_lcd_panel_handle_t   s_panel = NULL;
static esp_lcd_panel_io_handle_t s_panel_io = NULL;
static esp_lcd_touch_handle_t   s_touch = NULL;
static lv_display_t            *s_disp = NULL;
static lv_indev_t              *s_indev = NULL;

static void backlight_init(void)
{
    const gpio_config_t cfg = {
        .mode = GPIO_MODE_OUTPUT,
        .pin_bit_mask = 1ULL << PIN_LCD_BL,
    };
    ESP_ERROR_CHECK(gpio_config(&cfg));
    gpio_set_level(PIN_LCD_BL, 0);   /* off until the panel is ready */
}

static void display_init(void)
{
    ESP_LOGI(TAG, "init LCD SPI bus");
    const spi_bus_config_t bus = {
        .sclk_io_num = PIN_LCD_SCLK,
        .mosi_io_num = PIN_LCD_MOSI,
        .miso_io_num = PIN_LCD_MISO,
        .quadwp_io_num = -1,
        .quadhd_io_num = -1,
        .max_transfer_sz = LCD_H_RES * LVGL_BUF_LINES * sizeof(uint16_t),
    };
    ESP_ERROR_CHECK(spi_bus_initialize(LCD_HOST, &bus, SPI_DMA_CH_AUTO));

    const esp_lcd_panel_io_spi_config_t io_cfg = {
        .cs_gpio_num = PIN_LCD_CS,
        .dc_gpio_num = PIN_LCD_DC,
        .spi_mode = 0,
        .pclk_hz = LCD_PIXEL_CLOCK_HZ,
        .trans_queue_depth = 10,
        .lcd_cmd_bits = LCD_CMD_BITS,
        .lcd_param_bits = LCD_PARAM_BITS,
    };
    ESP_ERROR_CHECK(esp_lcd_new_panel_io_spi(
        (esp_lcd_spi_bus_handle_t)LCD_HOST, &io_cfg, &s_panel_io));

    const esp_lcd_panel_dev_config_t panel_cfg = {
        .reset_gpio_num = PIN_LCD_RST,
        .rgb_ele_order = LCD_RGB_ELEMENT_ORDER_BGR,  /* CYD is BGR */
        .bits_per_pixel = 16,
    };
    ESP_ERROR_CHECK(esp_lcd_new_panel_st7789(s_panel_io, &panel_cfg, &s_panel));

    ESP_ERROR_CHECK(esp_lcd_panel_reset(s_panel));
    ESP_ERROR_CHECK(esp_lcd_panel_init(s_panel));
    ESP_ERROR_CHECK(esp_lcd_panel_invert_color(s_panel, false));
    ESP_ERROR_CHECK(esp_lcd_panel_disp_on_off(s_panel, true));
}

static void touch_init(void)
{
    ESP_LOGI(TAG, "init touch SPI bus");
    const spi_bus_config_t bus = {
        .sclk_io_num = PIN_TP_SCLK,
        .mosi_io_num = PIN_TP_MOSI,
        .miso_io_num = PIN_TP_MISO,
        .quadwp_io_num = -1,
        .quadhd_io_num = -1,
        .max_transfer_sz = 0,
    };
    ESP_ERROR_CHECK(spi_bus_initialize(TOUCH_HOST, &bus, SPI_DMA_DISABLED));

    esp_lcd_panel_io_handle_t tp_io = NULL;
    esp_lcd_panel_io_spi_config_t tp_io_cfg = ESP_LCD_TOUCH_IO_SPI_XPT2046_CONFIG(PIN_TP_CS);
    tp_io_cfg.pclk_hz = TOUCH_CLOCK_HZ;
    ESP_ERROR_CHECK(esp_lcd_new_panel_io_spi(
        (esp_lcd_spi_bus_handle_t)TOUCH_HOST, &tp_io_cfg, &tp_io));

    const esp_lcd_touch_config_t tp_cfg = {
        .x_max = LCD_H_RES,
        .y_max = LCD_V_RES,
        .rst_gpio_num = GPIO_NUM_NC,
        .int_gpio_num = GPIO_NUM_NC,
        .flags = {
            .swap_xy = 0,
            .mirror_x = 1,
            .mirror_y = 0,
        },
    };
    ESP_ERROR_CHECK(esp_lcd_touch_new_spi_xpt2046(tp_io, &tp_cfg, &s_touch));
}

static void lvgl_init(void)
{
    const lvgl_port_cfg_t port_cfg = ESP_LVGL_PORT_INIT_CONFIG();
    ESP_ERROR_CHECK(lvgl_port_init(&port_cfg));

    const lvgl_port_display_cfg_t disp_cfg = {
        .io_handle = s_panel_io,
        .panel_handle = s_panel,
        .buffer_size = LCD_H_RES * LVGL_BUF_LINES,
        .double_buffer = true,
        .hres = LCD_H_RES,
        .vres = LCD_V_RES,
        .monochrome = false,
        .rotation = {
            .swap_xy = false,
            .mirror_x = false,
            .mirror_y = false,
        },
        .flags = {
            .buff_dma = true,
        },
    };
    s_disp = lvgl_port_add_disp(&disp_cfg);

    const lvgl_port_touch_cfg_t touch_cfg = {
        .disp = s_disp,
        .handle = s_touch,
    };
    s_indev = lvgl_port_add_touch(&touch_cfg);
}

static void build_ui(void)
{
    /* Any LVGL call from outside the port task must be locked. */
    if (!lvgl_port_lock(0)) {
        ESP_LOGE(TAG, "could not take LVGL lock");
        return;
    }

    lv_obj_t *scr = lv_screen_active();

    lv_obj_t *label = lv_label_create(scr);
    lv_label_set_text(label, "Reflow Plate");
    lv_obj_align(label, LV_ALIGN_TOP_MID, 0, 20);

    lv_obj_t *arc = lv_arc_create(scr);
    lv_obj_set_size(arc, 180, 180);
    lv_arc_set_range(arc, 0, 260);
    lv_arc_set_value(arc, 25);
    lv_obj_center(arc);

    lv_obj_t *temp = lv_label_create(scr);
    lv_label_set_text(temp, "25 \xC2\xB0""C");
    lv_obj_center(temp);

    lvgl_port_unlock();
}

void app_main(void)
{
    backlight_init();
    display_init();
    touch_init();
    lvgl_init();
    build_ui();

    gpio_set_level(PIN_LCD_BL, 1);   /* backlight on, no white flash */

    /* The LVGL port runs its own task and handles lv_timer_handler().
     * Your control loop lives here, or better, in its own task. */

    while (1) {
        vTaskDelay(pdMS_TO_TICKS(1000));
    }
}