62 lines
4.1 KiB
Plaintext
62 lines
4.1 KiB
Plaintext
Command: /home/ricardo/.espressif/tools/python/v6.1/venv/bin/python /home/ricardo/.espressif/v6.1/esp-idf/tools/idf_monitor.py -p /dev/ttyUSB0 -b 115200 --toolchain-prefix xtensa-esp32-elf- --target esp32 --revision 0 /home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/V0.1/build/ReflowPlate.elf /home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/V0.1/build/bootloader/bootloader.elf -m '/home/ricardo/.espressif/tools/python/v6.1/venv/bin/python' '/home/ricardo/.espressif/v6.1/esp-idf/tools/idf.py'
|
||
ets Jul 29 2019 12:21:46
|
||
|
||
rst:0x1 (POWERON_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
|
||
configsip: 0, SPIWP:0xee
|
||
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
|
||
mode:DIO, clock div:2
|
||
load:0x3fff0040,len:6272
|
||
load:0x40078000,len:15824
|
||
load:0x40080400,len:3988
|
||
entry 0x40080644
|
||
[0;32mI (27) boot: ESP-IDF v6.1 2nd stage bootloader[0m
|
||
[0;32mI (27) boot: compile time Sep 13 2026 19:20:43[0m
|
||
[0;32mI (28) boot: Multicore bootloader[0m
|
||
[0;32mI (29) boot: chip revision: v3.1[0m
|
||
[0;32mI (31) boot.esp32: SPI Speed : 40MHz[0m
|
||
[0;32mI (35) boot.esp32: SPI Mode : DIO[0m
|
||
[0;32mI (39) boot.esp32: SPI Flash Size : 2MB[0m
|
||
[0;32mI (42) boot: Enabling RNG early entropy source...[0m
|
||
[0;32mI (47) boot: Partition Table:[0m
|
||
[0;32mI (49) boot: ## Label Usage Type ST Offset Length[0m
|
||
[0;32mI (56) boot: 0 nvs WiFi data 01 02 00009000 00006000[0m
|
||
[0;32mI (62) boot: 1 phy_init RF data 01 01 0000f000 00001000[0m
|
||
[0;32mI (69) boot: 2 factory factory app 00 00 00010000 00100000[0m
|
||
[0;32mI (75) boot: End of partition table[0m
|
||
[0;32mI (79) esp_image: segment 0: paddr=00010020 vaddr=3f400020 size=103a8h ( 66472) map[0m
|
||
[0;32mI (110) esp_image: segment 1: paddr=000203d0 vaddr=3ffb0000 size=02b4ch ( 11084) load[0m
|
||
[0;32mI (114) esp_image: segment 2: paddr=00022f24 vaddr=40080000 size=0d0f4h ( 53492) load[0m
|
||
[0;32mI (136) esp_image: segment 3: paddr=00030020 vaddr=400d0020 size=55280h (348800) map[0m
|
||
[0;32mI (261) esp_image: segment 4: paddr=000852a8 vaddr=4008d0f4 size=00854h ( 2132) load[0m
|
||
[0;32mI (262) esp_image: segment 5: paddr=00085b04 vaddr=50000000 size=00028h ( 40) load[0m
|
||
[0;32mI (272) boot: Loaded app from partition at offset 0x10000[0m
|
||
[0;32mI (272) boot: Disabling RNG early entropy source...[0m
|
||
[0;32mI (287) cpu_start: Multicore app[0m
|
||
[0;32mI (295) cpu_start: GPIO 3 and 1 are used as console UART I/O pins[0m
|
||
[0;32mI (295) cpu_start: Pro cpu start user code[0m
|
||
[0;32mI (295) cpu_start: cpu freq: 160000000 Hz[0m
|
||
[0;32mI (297) app_init: Application information:[0m
|
||
[0;32mI (301) app_init: Project name: ReflowPlate[0m
|
||
[0;32mI (305) app_init: App version: 1[0m
|
||
[0;32mI (309) app_init: Compile time: Sep 13 2026 19:20:08[0m
|
||
[0;32mI (314) app_init: ELF file SHA256: fcccf1b7a...[0m
|
||
[0;32mI (318) app_init: ESP-IDF: v6.1[0m
|
||
[0;32mI (322) efuse_init: Min chip rev: v0.0[0m
|
||
[0;32mI (326) efuse_init: Max chip rev: v3.99 [0m
|
||
[0;32mI (330) efuse_init: Chip rev: v3.1[0m
|
||
[0;32mI (334) heap_init: Initializing. RAM available for dynamic allocation:[0m
|
||
[0;32mI (340) heap_init: At 3FFAE6E0 len 00001920 (6 KiB): DRAM[0m
|
||
[0;32mI (345) heap_init: At 3FFC3900 len 0001C700 (113 KiB): DRAM[0m
|
||
[0;32mI (350) heap_init: At 3FFE0440 len 00003AE0 (14 KiB): D/IRAM[0m
|
||
[0;32mI (355) heap_init: At 3FFE4350 len 0001BCB0 (111 KiB): D/IRAM[0m
|
||
[0;32mI (361) heap_init: At 4008D948 len 000126B8 (73 KiB): IRAM[0m
|
||
[0;33mW (367) spi_flash: Detected boya flash chip but using generic driver. For optimal functionality, enable `SPI_FLASH_SUPPORT_BOYA_CHIP` in menuconfig[0m
|
||
[0;32mI (379) spi_flash: detected chip: generic[0m
|
||
[0;32mI (383) spi_flash: flash io: dio[0m
|
||
[0;33mW (386) spi_flash: Detected size(4096k) larger than the size in the binary image header(2048k). Using the size in the binary image header.[0m
|
||
[0;32mI (400) main_task: Started on CPU0[0m
|
||
[0;32mI (400) main_task: Calling app_main()[0m
|
||
[0;32mI (400) cyd: init LCD SPI bus[0m
|
||
[0;32mI (520) cyd: init touch SPI bus[0m
|
||
[0;32mI (520) LVGL: Starting LVGL task[0m
|