59 lines
3.7 KiB
Plaintext
59 lines
3.7 KiB
Plaintext
Command: ninja flash
|
||
[1/5] cd "/home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/V0.1/build" && /home/ricardo/.espressif/tools/python/v6.1/venv/bin/python /home/ricardo/.espressif/v6.1/esp-idf/components/partition_table/check_sizes.py --offset 0x8000 partition --type app /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/V0.1/build/partition_table/partition-table.bin /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/V0.1/build/ReflowPlate.bin
|
||
ReflowPlate.bin binary size 0x758f0 bytes. Smallest app partition is 0x100000 bytes. 0x8a710 bytes (54%) free.
|
||
[2/5] Performing build step for 'bootloader'
|
||
[1/1] cd "/home/ricardo/ElectroNext/Projects/Reflow plate/esp-idf-firmware/V0.1/build/bootloader" && /home/ricardo/.espressif/tools/python/v6.1/venv/bin/python /home/ricardo/.espressif/v6.1/esp-idf/components/partition_table/check_sizes.py --offset 0x8000 bootloader 0x1000 /home/ricardo/ElectroNext/Projects/Reflow\ plate/esp-idf-firmware/V0.1/build/bootloader/bootloader.bin
|
||
Bootloader binary size 0x6640 bytes. 0x9c0 bytes (9%) free.
|
||
[3/5] No install step for 'bootloader'
|
||
[4/5] Completed 'bootloader'
|
||
[4/5] Running utility command for flash
|
||
esptool --chip esp32 -p /dev/ttyUSB0 -b 460800 --before=default-reset --after=hard-reset write-flash --flash-mode dio --flash-freq 40m --flash-size 2MB 0x1000 bootloader/bootloader.bin 0x8000 partition_table/partition-table.bin 0x10000 ReflowPlate.bin --diff-with bootloader/bootloader_flashed.bin partition_table/partition-table_flashed.bin ReflowPlate_flashed.bin
|
||
esptool v5.4.0
|
||
Serial port /dev/ttyUSB0:
|
||
Connecting....
|
||
[1A[2K[1A[2KConnected to ESP32 on /dev/ttyUSB0:
|
||
Chip type: ESP32-D0WD-V3 (revision v3.1)
|
||
Features: Wi-Fi, BT, Dual Core + LP Core, 240MHz, Vref calibration in eFuse, Coding Scheme None
|
||
Crystal frequency: 40MHz
|
||
MAC: 6c:c8:40:46:0c:d4
|
||
|
||
Uploading stub flasher...
|
||
Running stub flasher...
|
||
[1A[2K[1A[2KStub flasher running.
|
||
Changing baud rate to 460800...
|
||
Changed.
|
||
|
||
Configuring flash size...
|
||
|
||
Writing 'bootloader/bootloader.bin' at 0x00001000...
|
||
SHA digest in image updated.
|
||
SHA digest in image updated.
|
||
No changed sectors found, verifying if data is in flash...
|
||
[1A[2K'bootloader/bootloader.bin' at 0x00001000 verified.
|
||
|
||
Writing 'partition_table/partition-table.bin' at 0x00008000...
|
||
No changed sectors found, verifying if data is in flash...
|
||
[1A[2K'partition_table/partition-table.bin' at 0x00008000 verified.
|
||
|
||
Writing 'ReflowPlate.bin' at 0x00010000...
|
||
Changed data sectors found, fast reflashing...
|
||
Reflashing 1 changed sector at 0x00010000...
|
||
Flash will be erased from 0x00010000 to 0x00010fff...
|
||
Compressed 4096 bytes to 1879...
|
||
|
||
[2KWriting at 0x00011000 [38;2;114;156;31m━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━[0m 100.0% 1.83kB/1.83kB [0s]
|
||
[1A[2K[1A[2KWrote 4096 bytes (1879 compressed) at 0x00010000 in 0.0 seconds (690.6 kbit/s).
|
||
Reflashing 1 changed sector at 0x00036000...
|
||
Flash will be erased from 0x00036000 to 0x00036fff...
|
||
Compressed 4096 bytes to 3270...
|
||
|
||
[2KWriting at 0x00037000 [38;2;114;156;31m━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━[0m 100.0% 3.19kB/3.19kB [0s]
|
||
[1A[2K[1A[2KWrote 4096 bytes (3270 compressed) at 0x00036000 in 0.1 seconds (387.5 kbit/s).
|
||
Reflashing 1 changed sector at 0x00085000...
|
||
Flash will be erased from 0x00085000 to 0x00085fff...
|
||
Compressed 4096 bytes to 1619...
|
||
|
||
[2KWriting at 0x00086000 [38;2;114;156;31m━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━[0m 100.0% 1.58kB/1.58kB [0s]
|
||
[1A[2K[1A[2KWrote 4096 bytes (1619 compressed) at 0x00085000 in 0.1 seconds (509.9 kbit/s).
|
||
Verifying written data...
|
||
[1A[2KHash of data verified.
|
||
|
||
Hard resetting via RTS pin...
|